Deactivation Study of Fe2O3–CeO2 during Redox Cycles for CO Production from CO2

• Published in: Industrial & engineering chemistry research 2016-05, Vol.55 (20), p.5911-5922
• Main Authors: Dharanipragada, N. V. R. Aditya, Meledina, Maria, Galvita, Vladimir V, Poelman, Hilde, Turner, Stuart, Van Tendeloo, Gustaaf, Detavernier, Christophe, Marin, Guy B
• Format: Article
• Language: English
• ISSN: 0888-5885; 1520-5045
• DOI: 10.1021/acs.iecr.6b00963

Deactivation was investigated in Fe2O3–CeO2 oxygen storage materials during repeated H2-reduction and CO2-reoxidation. In situ XRD, XAS, and TEM were used to identify phases, crystallite sizes, and morphological changes upon cycling operation. The effect of redox cycling was investigated both in Fe-rich (80 wt % Fe2O3–CeO2) and Ce-rich (10 wt %Fe2O3–CeO2) materials. The former consisted of 100 nm Fe2O3 particles decorated with 5–10 nm Ce1–x Fe x O2−x . The latter presented CeO2 with incorporated Fe, i.e. a solid solution of Ce1–x Fe x O2−x , as the main oxygen carrier. By modeling the EXAFS Ce–K signal for as-prepared 10 wt %Fe2O3–CeO2, the amount of Fe in CeO2 was determined as 21 mol %, corresponding to 86% of the total iron content. Sintering and solid–solid transformations, the latter including both new phase formation and element segregation, were identified as deactivation pathways upon redox cycling. In Ce-rich material, perovskite (CeFeO3) was identified by XRD. This phase remained inert during reduction and reoxidation, resulting in an overall lower oxygen storage capacity. Further, Fe segregated from the solid solution, thereby decreasing its reducibility. In addition, an increase in crystallite size occurred for all phases. In Fe-rich material, sintering is the main deactivation pathway, although Fe segregation from the solid solution and perovskite formation cannot be excluded.