Corrosion Behavior of High and Low Temperature Austempered Ductile Iron (ADI) in Iron Ore Slurry

• Published in: Materials performance and characterization 2017-09, Vol.6 (1), p.369-378
• Main Authors: Aithal, Pooja M., Vijayan, Vijeesh, Surendranathan, A. O., Udupa, K. R., Samuel, K. G.
• Format: Article
• Language: English
• ISSN: 2379-1365; 2165-3992
• DOI: 10.1520/MPC20160070

Corrosion behavior of austempered ductile iron (ADI) and forged EN31 steel balls in a ground iron ore slurry was studied as a function of time in the slurry, while the microstructure of ADI developed due to different tempering temperature and tempering time. The corrosion rates of the grinding balls immersed in the iron ore slurry were determined using electrochemical analysis and weight loss methods. It was found that the pH of the iron ore slurry increased with time and the corrosion behavior was influenced by the pH of the slurry. The corrosion rate of forged EN31 steel balls increased with the increase in time and pH of the slurry, whereas the corrosion rate of ADI balls depended on the austempering treatment. In general, the forged EN31 steel ball offered better corrosion resistance than ADIs during the early stages of exposure in the slurry (low pH values of the slurry), but at higher pH values of the slurry, the ADIs yielded better corrosion resistance than forged EN31 steel balls. The ADI austempered at higher temperatures showed better corrosion resistance than the ones austempered at lower temperatures.