Bedload transport measurements at the Erlenbach stream with geophones and automated basket samplers

• Published in: Earth surface processes and landforms 2012-07, Vol.37 (9), p.1000-1011
• Main Authors: Rickenmann, Dieter, Turowski, Jens M., Fritschi, Bruno, Klaiber, Angela, Ludwig, Andreas
• Format: Article
• Language: English
• Subjects: bedload transport; Bgi / Prodig; calibration; Fluvial forms and processes; Geomorphology; geophone sensor; indirect measurement; mountain stream; Physical geography; steep stream
• ISSN: 0197-9337; 1096-9837
• DOI: 10.1002/esp.3225

ABSTRACT In the Erlenbach stream, a pre‐alpine steep channel in Switzerland, sediment transport has been monitored for more than 25 years. Near the confluence with the main valley river, stream flow is monitored and sediment is collected in a retention basin with a capacity of about 2000 m3. The basin is surveyed at regular intervals and after large flood events. In addition, sediment transport has been continuously monitored with piezoelectric bedload impact and geophone sensors since 1986. In 2008–2009, the measuring system in the Erlenbach stream was enhanced by installing an automatic system to obtain bedload samples. Movable metal baskets are mounted on a rail at the downstream wall of the large check dam above the retention basin, and they can be moved automatically into the flow to take bedload transport samples. The wire mesh of the baskets has a spacing of 10 mm to sample all sediment particles coarser than this size (which is about the limiting grain size detected by the geophones). The upgraded measuring system permits to obtain bedload samples over short sampling periods and to measure the grain size distribution of the transported material and its variation over time and with discharge. The analysis of calibration relationships for the geophone measuring system confirms findings from very similar measurements which were performed until 1999 with piezoelectric bedload impact sensors; there is a linear relationship between impulse counts and bedload mass passing over the sensors. Findings from flume experiments are used to discuss the most important factors which affect the calibration of the geophone signal. The bedload transport rates as measured by the moving baskets are among the highest measured in natural streams, with values of the order of several kilograms per meter per second. Copyright © 2012 John Wiley & Sons, Ltd.