Loading…
Effect of Blowing Agent CaCO3 Content on the Microstructure and Mechanical Properties of AA 5083 Foam
In the present investigation, AA 5083 foam structures were fabricated, and the quasi-static uniaxial loading behavior of AA 5083 foam with varying concentration of blowing agent (CaCO 3 ) was studied. Also, the effect of the CaCO 3 blowing agent on the foam features such as pore size, pore circulari...
Saved in:
| Published in: | International journal of metalcasting 2022-10, Vol.16 (4), p.1885-1901 |
|---|---|
| Main Authors: | , , , |
| Format: | Article |
| Language: | English |
| Subjects: | |
| Citations: | Items that this one cites Items that cite this one |
| Online Access: | Get full text |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| cited_by | cdi_FETCH-LOGICAL-c291t-76fddfc71d49146be6ddffd6452bc233041d1ff4ae574f6e8d29289177c4dcec3 |
|---|---|
| cites | cdi_FETCH-LOGICAL-c291t-76fddfc71d49146be6ddffd6452bc233041d1ff4ae574f6e8d29289177c4dcec3 |
| container_end_page | 1901 |
| container_issue | 4 |
| container_start_page | 1885 |
| container_title | International journal of metalcasting |
| container_volume | 16 |
| creator | Bommana, Divakar Sahoo, Niranjan Dwivedy, Santosha K. Dora, T. Rajesh Kumar |
| description | In the present investigation, AA 5083 foam structures were fabricated, and the quasi-static uniaxial loading behavior of AA 5083 foam with varying concentration of blowing agent (CaCO
3
) was studied. Also, the effect of the CaCO
3
blowing agent on the foam features such as pore size, pore circularity, pore distribution, and cell wall thickness was also carried out. It was observed that with the increase in CaCO
3
(wt%), the relative density of the foam and the plateau stress, and the energy absorption of the foam get reduced. The influence of blowing agent on the pore features such as pore size and distribution seemed to be minimal; therefore, no significant improvement in the pore circularity was found. The quasi-static compression test results have got affected due to the varying plastic strength of the foam that resulted due to changes in the pore size and circularity. However, a detailed analysis of the dependence of these AA 5083 foam features (porosity, pore size distribution, and circularity) on CaCO
3
blowing agent is discussed in this article.
Graphical Abstract |
| doi_str_mv | 10.1007/s40962-021-00726-0 |
| format | article |
| fullrecord | <record><control><sourceid>crossref_sprin</sourceid><recordid>TN_cdi_crossref_primary_10_1007_s40962_021_00726_0</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>10_1007_s40962_021_00726_0</sourcerecordid><originalsourceid>FETCH-LOGICAL-c291t-76fddfc71d49146be6ddffd6452bc233041d1ff4ae574f6e8d29289177c4dcec3</originalsourceid><addsrcrecordid>eNp9kM1KAzEUhYMoWGpfwFVeIJq_yUyW49CqYKkLXYc0P-2UNilJivj2pta1d3EvB-45HD4A7gl-IBi3j5ljKSjClKAqqUD4CkwoEQwxItk1mNQtUSM7cgtmOe9wnYa3hLMJcHPvnSkwevi0j19j2MB-40KBgx5WDA4xlLOKAZatg8vRpJhLOplySg7qYOHSma0Oo9F7-J7i0aUyunyO63vY4I7BRdSHO3Dj9T672d-dgs_F_GN4QW-r59ehf0OGSlJQK7y13rTEckm4WDtRpbeCN3RtKGOYE0u859o1LffCdZZK2knStoZb4wybAnrJPdfMyXl1TONBp29FsDqzUhdWqrJSv6wUriZ2MeX6HDYuqV08pVB7_uf6AdcCa7c</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype></control><display><type>article</type><title>Effect of Blowing Agent CaCO3 Content on the Microstructure and Mechanical Properties of AA 5083 Foam</title><source>Springer Nature</source><creator>Bommana, Divakar ; Sahoo, Niranjan ; Dwivedy, Santosha K. ; Dora, T. Rajesh Kumar</creator><creatorcontrib>Bommana, Divakar ; Sahoo, Niranjan ; Dwivedy, Santosha K. ; Dora, T. Rajesh Kumar</creatorcontrib><description>In the present investigation, AA 5083 foam structures were fabricated, and the quasi-static uniaxial loading behavior of AA 5083 foam with varying concentration of blowing agent (CaCO
3
) was studied. Also, the effect of the CaCO
3
blowing agent on the foam features such as pore size, pore circularity, pore distribution, and cell wall thickness was also carried out. It was observed that with the increase in CaCO
3
(wt%), the relative density of the foam and the plateau stress, and the energy absorption of the foam get reduced. The influence of blowing agent on the pore features such as pore size and distribution seemed to be minimal; therefore, no significant improvement in the pore circularity was found. The quasi-static compression test results have got affected due to the varying plastic strength of the foam that resulted due to changes in the pore size and circularity. However, a detailed analysis of the dependence of these AA 5083 foam features (porosity, pore size distribution, and circularity) on CaCO
3
blowing agent is discussed in this article.
Graphical Abstract</description><identifier>ISSN: 1939-5981</identifier><identifier>EISSN: 2163-3193</identifier><identifier>DOI: 10.1007/s40962-021-00726-0</identifier><language>eng</language><publisher>Cham: Springer International Publishing</publisher><subject>Characterization and Evaluation of Materials ; Chemistry and Materials Science ; Materials Science ; Metallic Materials ; Structural Materials ; Technical Paper</subject><ispartof>International journal of metalcasting, 2022-10, Vol.16 (4), p.1885-1901</ispartof><rights>American Foundry Society 2021</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c291t-76fddfc71d49146be6ddffd6452bc233041d1ff4ae574f6e8d29289177c4dcec3</citedby><cites>FETCH-LOGICAL-c291t-76fddfc71d49146be6ddffd6452bc233041d1ff4ae574f6e8d29289177c4dcec3</cites><orcidid>0000-0003-1902-6238</orcidid></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,780,784,27923,27924</link.rule.ids></links><search><creatorcontrib>Bommana, Divakar</creatorcontrib><creatorcontrib>Sahoo, Niranjan</creatorcontrib><creatorcontrib>Dwivedy, Santosha K.</creatorcontrib><creatorcontrib>Dora, T. Rajesh Kumar</creatorcontrib><title>Effect of Blowing Agent CaCO3 Content on the Microstructure and Mechanical Properties of AA 5083 Foam</title><title>International journal of metalcasting</title><addtitle>Inter Metalcast</addtitle><description>In the present investigation, AA 5083 foam structures were fabricated, and the quasi-static uniaxial loading behavior of AA 5083 foam with varying concentration of blowing agent (CaCO
3
) was studied. Also, the effect of the CaCO
3
blowing agent on the foam features such as pore size, pore circularity, pore distribution, and cell wall thickness was also carried out. It was observed that with the increase in CaCO
3
(wt%), the relative density of the foam and the plateau stress, and the energy absorption of the foam get reduced. The influence of blowing agent on the pore features such as pore size and distribution seemed to be minimal; therefore, no significant improvement in the pore circularity was found. The quasi-static compression test results have got affected due to the varying plastic strength of the foam that resulted due to changes in the pore size and circularity. However, a detailed analysis of the dependence of these AA 5083 foam features (porosity, pore size distribution, and circularity) on CaCO
3
blowing agent is discussed in this article.
Graphical Abstract</description><subject>Characterization and Evaluation of Materials</subject><subject>Chemistry and Materials Science</subject><subject>Materials Science</subject><subject>Metallic Materials</subject><subject>Structural Materials</subject><subject>Technical Paper</subject><issn>1939-5981</issn><issn>2163-3193</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2022</creationdate><recordtype>article</recordtype><recordid>eNp9kM1KAzEUhYMoWGpfwFVeIJq_yUyW49CqYKkLXYc0P-2UNilJivj2pta1d3EvB-45HD4A7gl-IBi3j5ljKSjClKAqqUD4CkwoEQwxItk1mNQtUSM7cgtmOe9wnYa3hLMJcHPvnSkwevi0j19j2MB-40KBgx5WDA4xlLOKAZatg8vRpJhLOplySg7qYOHSma0Oo9F7-J7i0aUyunyO63vY4I7BRdSHO3Dj9T672d-dgs_F_GN4QW-r59ehf0OGSlJQK7y13rTEckm4WDtRpbeCN3RtKGOYE0u859o1LffCdZZK2knStoZb4wybAnrJPdfMyXl1TONBp29FsDqzUhdWqrJSv6wUriZ2MeX6HDYuqV08pVB7_uf6AdcCa7c</recordid><startdate>20221001</startdate><enddate>20221001</enddate><creator>Bommana, Divakar</creator><creator>Sahoo, Niranjan</creator><creator>Dwivedy, Santosha K.</creator><creator>Dora, T. Rajesh Kumar</creator><general>Springer International Publishing</general><scope>AAYXX</scope><scope>CITATION</scope><orcidid>https://orcid.org/0000-0003-1902-6238</orcidid></search><sort><creationdate>20221001</creationdate><title>Effect of Blowing Agent CaCO3 Content on the Microstructure and Mechanical Properties of AA 5083 Foam</title><author>Bommana, Divakar ; Sahoo, Niranjan ; Dwivedy, Santosha K. ; Dora, T. Rajesh Kumar</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c291t-76fddfc71d49146be6ddffd6452bc233041d1ff4ae574f6e8d29289177c4dcec3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2022</creationdate><topic>Characterization and Evaluation of Materials</topic><topic>Chemistry and Materials Science</topic><topic>Materials Science</topic><topic>Metallic Materials</topic><topic>Structural Materials</topic><topic>Technical Paper</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Bommana, Divakar</creatorcontrib><creatorcontrib>Sahoo, Niranjan</creatorcontrib><creatorcontrib>Dwivedy, Santosha K.</creatorcontrib><creatorcontrib>Dora, T. Rajesh Kumar</creatorcontrib><collection>CrossRef</collection><jtitle>International journal of metalcasting</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Bommana, Divakar</au><au>Sahoo, Niranjan</au><au>Dwivedy, Santosha K.</au><au>Dora, T. Rajesh Kumar</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Effect of Blowing Agent CaCO3 Content on the Microstructure and Mechanical Properties of AA 5083 Foam</atitle><jtitle>International journal of metalcasting</jtitle><stitle>Inter Metalcast</stitle><date>2022-10-01</date><risdate>2022</risdate><volume>16</volume><issue>4</issue><spage>1885</spage><epage>1901</epage><pages>1885-1901</pages><issn>1939-5981</issn><eissn>2163-3193</eissn><abstract>In the present investigation, AA 5083 foam structures were fabricated, and the quasi-static uniaxial loading behavior of AA 5083 foam with varying concentration of blowing agent (CaCO
3
) was studied. Also, the effect of the CaCO
3
blowing agent on the foam features such as pore size, pore circularity, pore distribution, and cell wall thickness was also carried out. It was observed that with the increase in CaCO
3
(wt%), the relative density of the foam and the plateau stress, and the energy absorption of the foam get reduced. The influence of blowing agent on the pore features such as pore size and distribution seemed to be minimal; therefore, no significant improvement in the pore circularity was found. The quasi-static compression test results have got affected due to the varying plastic strength of the foam that resulted due to changes in the pore size and circularity. However, a detailed analysis of the dependence of these AA 5083 foam features (porosity, pore size distribution, and circularity) on CaCO
3
blowing agent is discussed in this article.
Graphical Abstract</abstract><cop>Cham</cop><pub>Springer International Publishing</pub><doi>10.1007/s40962-021-00726-0</doi><tpages>17</tpages><orcidid>https://orcid.org/0000-0003-1902-6238</orcidid></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 1939-5981 |
| ispartof | International journal of metalcasting, 2022-10, Vol.16 (4), p.1885-1901 |
| issn | 1939-5981 2163-3193 |
| language | eng |
| recordid | cdi_crossref_primary_10_1007_s40962_021_00726_0 |
| source | Springer Nature |
| subjects | Characterization and Evaluation of Materials Chemistry and Materials Science Materials Science Metallic Materials Structural Materials Technical Paper |
| title | Effect of Blowing Agent CaCO3 Content on the Microstructure and Mechanical Properties of AA 5083 Foam |
| url | http://sfxeu10.hosted.exlibrisgroup.com/loughborough?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-11T02%3A54%3A58IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-crossref_sprin&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Effect%20of%20Blowing%20Agent%20CaCO3%20Content%20on%20the%20Microstructure%20and%20Mechanical%20Properties%20of%20AA%205083%20Foam&rft.jtitle=International%20journal%20of%20metalcasting&rft.au=Bommana,%20Divakar&rft.date=2022-10-01&rft.volume=16&rft.issue=4&rft.spage=1885&rft.epage=1901&rft.pages=1885-1901&rft.issn=1939-5981&rft.eissn=2163-3193&rft_id=info:doi/10.1007/s40962-021-00726-0&rft_dat=%3Ccrossref_sprin%3E10_1007_s40962_021_00726_0%3C/crossref_sprin%3E%3Cgrp_id%3Ecdi_FETCH-LOGICAL-c291t-76fddfc71d49146be6ddffd6452bc233041d1ff4ae574f6e8d29289177c4dcec3%3C/grp_id%3E%3Coa%3E%3C/oa%3E%3Curl%3E%3C/url%3E&rft_id=info:oai/&rft_id=info:pmid/&rfr_iscdi=true |