Mechanism of primary Si and Fe-segregation for a hypereutectic 90 wt.% Si–Ti alloy melt in directional solidification via electromagnetism

• Published in: Journal of iron and steel research, international international, 2023-04, Vol.30 (4), p.726-735
• Main Authors: Zhu, Kui-song, Cao, Li, Zhao, Ying-tao, Wang, Jun, Cheng, Xiang-kui
• Format: Article
• Language: English
• Subjects: Applied and Technical Physics; Engineering; Machines; Manufacturing; Materials Engineering; Materials Science; Metallic Materials; Original Paper; Physical Chemistry; Processes
• ISSN: 1006-706X; 2210-3988
• DOI: 10.1007/s42243-023-00925-5

The electromagnetic directional solidification (DS) phase separation experiments of high silicon 90 wt.% Si–Ti alloy were performed under various pulling-down speeds. The results showed that Si enriched layer, Si + TiSi 2 -rich layer and Si–Ti–Fe alloy layer appeared successively in axial direction of ingot after electromagnetic DS of 90 wt.% Si–Ti alloy melt at different pulling-down speeds. Separation of primary Si and segregation mechanism of metal impurities (Fe) during the electromagnetic DS process were controlled by pulling-down speed of ingot and electromagnetic stirring. When pulling-down speed was 5 μm/s, minimum thickness of the Si enriched layer was 29.4 mm, and the highest content of primary Si in this layer was 92.46 wt.%; meanwhile, the highest removal rate of Fe as metal impurity was 92.90%. The type of inclusions in the Si enriched layer is determined by Fe content of segregated Si enriched layer. When the pulling-down speed was 5 μm/s, the inclusions in the Si enriched layer were TiSi 2 . Finally, when the pulling-down speed reached greater than 5 μm/s, the inclusions in the Si enriched layer evolved into TiSi 2  + τ 5 .