Flow injection for the determination of Se(IV) and Se(VI) by hydride generation atomic absorption spectrometry with microwave oven on-line prereduction of Se(VI) to Se(IV)

• Published in: Spectrochimica acta. Part B: Atomic spectroscopy 1996-12, Vol.51 (14), p.1837-1847
• Main Authors: Burguera, J.L., Carrero, P., Burguera, M., Rondon, C., Brunetto, M.R., Gallignani, M.
• Format: Article
• Language: English
• Subjects: Citric fruit juices; Geothermal waters; Hydride generation; On-line flow injection; Se(IV); Se(VI)
• ISSN: 0584-8547; 1873-3565
• DOI: 10.1016/S0584-8547(96)01521-2

An on-line flow injection system has been developed for the selective determination of Se(IV) and Se(VI) in citric fruit juices and geothermal waters by hydride generation atomic absorption spectrometry with microwave-aided heating prereduction of Se(VI) to Se(IV). The samples and the prereductant solutions (4 mol l −1 HCl for Se(IV) and 12 mol l −1 HCl for Se(VI)) which circulated in a closed-flow circuit were injected by means of a time-based injector. This mixture was displaced by a carrier solution of 1% v/v of hydrochloric acid through a PTFE coil located inside the focused microwave oven and mixed downstream with a borohydride solution to generate the hydride. The linear ranges were 0–120 and 0–100 μg l −1 of Se(IV) and Se(VI), respectively. The detection limits were 1.0 μg l −1 for Se(IV) and 1.5 μg l −1 for Se(VI). The precision (about 2.0–2.5% RSD) and recoveries (96–98% for Se(IV) and 94–98% for Se(VI)) were good. Total selenium values were also obtained by electrothermal atomic absorption spectrometry which agreed with the content of both selenium species. The sample throughput was about 50 measurements per hour. The main advantage of the method is that the selective determination of Se(IV) and Se(VI) in citric fruit juices and geothermal waters is performed in a closed system with a minimum sample manipulation, exposure to the environment, minimum sample waste and operator attention.