Determination of heavy metals by inductively coupled plasma mass spectrometry after on-line separation and preconcentration

• Published in: Spectrochimica acta. Part B: Atomic spectroscopy 1998-10, Vol.53 (11), p.1527-1539
• Main Authors: Dressler, Valderi L, Pozebon, Dirce, Curtius, Adilson J
• Format: Article
• Language: English
• Subjects: Analytical chemistry; certified reference material; Chemistry; Exact sciences and technology; flow injection analysis; inductively coupled plasma mass spectrometry; O,O-diethyl dithiophosphoric acid; preconcentration; Spectrometric and optical methods
• ISSN: 0584-8547; 1873-3565
• DOI: 10.1016/S0584-8547(98)00180-3

A method for the determination of Cu, As, Se, Cd, In, Hg, Tl, Pb and Bi in waters and in biological materials by inductively coupled plasma mass spectrometry, after an on-line separation, is described. The matrix separation and analyte preconcentration is accomplished by retention of the analytes complexed with the ammonium salt of O,O-diethyl dithiophosphoric acid in a HNO 3 solution on C 18 immobilized on silica in a minicolumn. Methanol, as eluent, is introduced in the conventional pneumatic nebulizer of the instrument. In order to use the best compromise conditions, concerning the ligand and acid concentrations, the analytes were determined in two separate groups. The enrichment factors were in the range from 5 to 61, depending on the analyte. The limits of detection varied from 0.43 ng L −1 for Bi to 33 ng L −1 for Cu. The sample consumption is only 2.3 mL for each group and the sampling frequency is 21 h −1. The accuracy was tested by analysing five certified reference materials: water, riverine water, urine, bovine muscle and bovine liver. The agreement between obtained and certified concentrations was very good, except for As. The relatively small volume of methanol, used as eluent, minimizes the problems produced by the introduction of organic solvent into the plasma.