Investigation of eddy currents in the components of the dynamic ergodic divertor of TEXTOR using analytical and numerical approaches

• Published in: Fusion engineering and design 2003-09, Vol.66, p.419-423
• Main Authors: Giesen, B., Neubauer, O., Bondarchuk, E., Doinikov, N., Kitaev, B., Obidenko, T., Panin, A.
• Format: Article
• Language: English
• Subjects: Design optimization; Dynamic ergodic divertor; Eddy currents; Tokamak
• ISSN: 0920-3796; 1873-7196
• DOI: 10.1016/S0920-3796(03)00181-9

Analytical and numerical approaches for the calculation of eddy currents in mechanical structures of the TEXTOR tokamak in view of operating the dynamic ergodic divertor (DED) coil system fed with the alternating current up to 15 kA at frequencies up to 10 kHz are described. The design of the in-vessel components located close to the DED coils requires detailed investigation of eddy current effects to avoid unacceptable heating and forces. Different approaches depending on skin-layer depths compared with the body dimensions are analyzed. The applied algorithms are based on analytical and simplified numerical methods. Precision and application range of these algorithms have been checked by a numerical code. The simplified technique is rather effective for first step engineering estimation and gives a good understanding for the problem. In a certain parameter range, it results in even precise values and can be used for design optimization of the structures without huge efforts in numerical modeling. After modification of the component's shape prototypes have been manufactured and successfully tested in a full-scale model under the real DED field. The design recommendations resulting from the eddy current studies contributed significantly to the optimized lay out of the DED in-vessel components.