Individual and synergistic effect of gamma alumina (γ-Al2O3) and strontium on microstructure and mechanical properties of Al-20Si alloy

• Published in: Transactions of Nonferrous Metals Society of China 2019-07, Vol.29 (7), p.1353-1364
• Main Authors: ACHARYA, Mihira, MANDAL, Animesh
• Format: Article
• Language: English
• Subjects: Al-Si alloy; modification; primary Si; refinement; γ-Al2O3
• ISSN: 1003-6326
• DOI: 10.1016/S1003-6326(19)65042-9

An optimized combination of gamma alumina (4 wt.%) and strontium (0.1 wt.%) was incorporated in cast Al-20Si alloy to obtain fine form of silicon. During casting process, the amount of γ-Al2O3 was varied from 0.5—6 wt.% to refine primary Si and Sr was varied from 0.05—0.1 wt.% to modify eutectic Si. The results showed that the average size of primary Si is 24 μm for addition of 4 wt.% γ-Al2O3 to the alloy whereas 0.1 wt.% Sr resulted in sphericity of eutectic Si to ˜0.6 and average length of ˜1.2 μm. The thermal analysis revealed that γ-Al2O3 can act as potential heterogeneous nucleation sites. Moreover, simultaneous addition of γ-Al2O3 and Sr does not poison γ-Al2O3 particles and inhibit their nucleation efficiency as in the case of combined addition of phosphorous and strontium to Al-20Si alloy. Therefore, it was concluded that enhanced tensile strength, i.e., ultimate tensile strength (increase by 20%) and elongation (increase by 23%) in Al-20Si-4γ-Al2O3-0.1wt.%Sr alloy as compared to as-cast Al-20Si alloy can be attributed to refinement of primary Si, modification of eutectic Si and the presence of α(Al) in the alloy as evident from eutectic shift.