Practical active control of cavity noise using loop shaping: Two case studies

A simple loop shaping technique is applied to design an optimal, robust feedback controller to reduce the interior noise of an acoustic cavity. It is a data-based technique that uses the measured plant response to tune the parameters of a fixed-structure controller in a graphical way. The two cases...

Full description

Saved in:
Bibliographic Details
Published in:Applied acoustics 2017-06, Vol.121, p.65-73
Main Authors: Kim, Sang-Myeong, Pereira, Joao A., Lopes, Vicente, Turra, Antonio E., Brennan, Michael J.
Format: Article
Language:English
Subjects:
Loop shaping
Noise control
Robust control
Second order filters, optimal control
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:A simple loop shaping technique is applied to design an optimal, robust feedback controller to reduce the interior noise of an acoustic cavity. It is a data-based technique that uses the measured plant response to tune the parameters of a fixed-structure controller in a graphical way. The two cases studied are narrowband noise control in a small cavity and broadband noise control in a long duct. Each control system consists of a microphone, a loudspeaker, and a controller connecting the two transducers that are further collocated. The fixed-structure of each controller should be chosen ahead of loop shaping and is determined in this paper solely based on the Nyquist plot of each plant measured. It turns out that a single band (high) pass filter of second order is suitable for the narrowband (broadband) noise control case considered. It is finally demonstrated with experiments that the technique is practical and a second order filter can be effectively used for active control of cavity noise in a single narrow or broad frequency band.
ISSN:0003-682X
1872-910X
DOI:10.1016/j.apacoust.2016.12.004