Multicationic LDH-derived Co(x)CeMgAlO mixed oxide catalysts for the total oxidation of methane

• Published in: Applied catalysis. A, General General, 2023-01, Vol.650, p.119001, Article 119001
• Main Authors: Stoian, Marius C., Romaniţan, Cosmin, Crăciun, Gabriel, Culiţă, Daniela C., Papa, Florica, Badea, Mihaela, Negrilă, Cătălin, Popescu, Ionel, Marcu, Ioan-Cezar
• Format: Article
• Language: English
• Subjects: Cerium; Cobalt; Layered double hydroxides; Methane combustion; Mixed oxides catalysts; VOC abatement
• ISSN: 0926-860X; 1873-3875
• DOI: 10.1016/j.apcata.2022.119001

Several Co(x)CeMgAlO mixed oxides with different cobalt contents x between 7 and 50 at% with respect to cations, but with fixed 10 at% Ce and Mg/Al atomic ratio of 3, were obtained by the calcination of layered double hydroxide (LDH) precursors at 750 °C. The mixed oxide catalysts were characterized by XRD, nitrogen adsorption, DRIFT, DR-UV-Vis, SEM-EDX, including elemental mapping, XPS, H2-TPR and O2-TPO techniques. XRD analysis indicated the coexistence of Co3O4 crystallites with periclase-like and ceria phases, distributed homogeneously as shown by EDX measurements. The surface composition determined by XPS and the redox properties studied by H2-TPR and O2-TPO were shown to be key factors controlling the catalytic behavior of the investigated materials. Their catalytic performance was evaluated in the total oxidation of methane, used as a volatile organic compound (VOC) model molecule. Co(40)CeMgAlO mixed oxide showed the highest catalytic activity for methane combustion with a T50 of 528 °C, associated with its greatest Co/Ce surface atomic ratio and the best redox properties in the Co(x)CeMgAlO series. In addition, the influence of the contact time on the catalytic activity of the Co(40)CeMgAlO mixed oxide has been examined and its good stability was evidenced from combustion tests with prolonged time on stream. Nevertheless, the addition of water vapors to the reaction mixture induces textural and structural changes of the mixed oxide with negative consequences on its performance. [Display omitted] •Multicationic Co(x)CeMgAl oxides have been synthesized from LDH precursors.•The Co content (7 ≤ x ≤ 50) strongly influences the catalytic behavior.•Co(40)CeMgAlO is the most active and highly stable catalyst in dry conditions.•The redox properties and the surface Co/Ce ratio are key factors affecting the activity.•The water vapors have a negative effect on the catalytic performance.