Influence of surface nitriding treatment on rolling contact behavior of Fe-based plasma sprayed coating

• Published in: Applied surface science 2013-02, Vol.266, p.420-425
• Main Authors: PIAO, Zhong-Yu, XU, Bin-Shi, WANG, Hai-Dou, WEN, Dong-Hui
• Format: Article
• Language: English
• Subjects: Condensed matter: electronic structure, electrical, magnetic, and optical properties; Condensed matter: structure, mechanical and thermal properties; Cross-disciplinary physics: materials science; rheology; Exact sciences and technology; Fe-based alloy; Nitriding layer; Physics; Plasma sprayed coating; Rolling contact fatigue
• ISSN: 0169-4332; 1873-5584
• DOI: 10.1016/j.apsusc.2012.12.051

► The dense nitriding layer was deposited on Fe-based sprayed coating. ► RCF lifetime of the coating with nitriding layer was lower. ► Cohesive delamination was the main failure mode of the coating with nitriding layer. ► Microdefects and high brittleness are the main failure reason. Fe–Cr coating was prepared by plasma spraying process. Gas nitriding treatment was conducted on the coating. Rolling contact fatigue (RCF) experiments were conducted using a ball-on-disc setup. RCF lifetime of the coating was calculated by two-parameter Weibull distribution. The worn morphologies of the coating were observed. Correlative failure mechanism was investigated based on fracture analysis and theoretical calculation. Results showed that the dense nitriding layer with high microhardness was formed on Fe-based coating surface. Unfortunately, the deposition of nitriding layer decreases RCF lifetime of the coating. The coating with nitriding layer always failed owing to cohesive delamination. The “born” microdefect and high brittleness of nitriding layer are the main reasons for the failures under rolling contact.