Catalytic combustion synthesis of CNTs/MgO composite powders and the influences on the thermal shock resistance of low-carbon Al2O3–C refractories

• Published in: Ceramics international 2022-04, Vol.48 (8), p.10601-10612
• Main Authors: Li, Guodan, Ding, Donghai, Xiao, Guoqing, Jin, Endong, Luo, Jiyuan, Lei, Changkun
• Format: Article
• Language: English
• Subjects: Catalytic combustion synthesis; CNTs/MgO composite Powders; Low-carbon Al2O3–C refractories; Thermal shock resistance
• ISSN: 0272-8842; 1873-3956
• DOI: 10.1016/j.ceramint.2021.12.274

Using MgC2O4, Mg powders as raw materials and Ni(NO3)2∙6H2O as a catalyst, CNTs/MgO composite powders were prepared by a catalytic combustion synthesis method. The CNTs/MgO composite powders were characterized by XRD, Raman spectroscopy, FESEM/EDS and HRTEM. The effects of catalyst content on the degree of graphitization and aspect ratio of the CNTs in composite powders were investigated. Moreover, the thermal shock resistance of low-carbon Al2O3–C refractories after adding the composite powder was investigated. The results indicated that the CNTs prepared with 1 wt% Ni(NO3)2∙6H2O addition had a higher degree of graphitization and aspect ratio. In particular, the aspect ratio could reach approximately 200. The growth mechanism of hollow bamboo-like CNTs in the composite powders was proven to be a V-L-S mechanism. The thermal shock resistance of Al2O3–C samples could be improved significantly after adding CNTs/MgO composite powders. In particular, compared with CM0, the residual strength ratio of Al2O3–C samples with added 2.5 wt% composite powders could be increased 63.9%.