TiO2 nanostructures synthesized by electrochemical anodization in green protic ionic liquids for photoelectrochemical applications

• Published in: Ceramics international 2023-08, Vol.49 (16), p.26900-26909
• Main Authors: Sánchez-García, G., Da Silva, E., Fernández-Domene, R.M., Cháfer, A., González-Alfaro, V., Solsona, B., Sánchez-Tovar, R.
• Format: Article
• Language: English
• Subjects: Catalysts; Ionic liquid; Photoelectrochemical water splitting; TiO2 nanostructures
• ISSN: 0272-8842
• DOI: 10.1016/j.ceramint.2023.05.227

This work studies the influence of the 2-hydroxyethylammonium acetate (2-HEAA) ionic liquid (IL) as an electrolyte in the electrochemical anodization of titanium for the synthesis of nanostructures for photoelectrochemical water splitting. Different 2-HEAA IL concentrations were used ranging from 0 to 4% v/v (IL-0 to IL-4) in electrolytes containing NH4F, water and ethylene glycol. Morphological, structural and electrochemical characterization of the nanostructures was carried out by means of field emission scanning electron microscopy (FE-SEM), high resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), electrochemical impedance spectroscopy (EIS), and Mott-Schottky (MS) analysis. Additionally, photoelectrochemical tests were carried out in order to evaluate the efficiency of these materials as catalysts for water splitting applications. According to the obtained results, the electrolyte used for electrochemical anodization should contain little amount of NH4F (0.05 M) in order to obtain efficient nanostructures for photoelectrochemical purposes. However, small concentrations of IL (IL-0.25) resulted in nanostructures with higher photocurrents than doubling the NH4F concentration to 0.1 M. Therefore, the IL addition contributes to a more sustainable electrolyte formulation. The best photoelectrochemical response for water splitting processes was obtained for the nanostructures anodized with 1% v/v of 2-HEAA IL (IL-1) due to their high surface/area (higher pore diameters, smaller nanotubes wall thickness and higher nanotubes lengths), better crystallinity and electrochemical response, showing photocurrents more than 100% higher than the ones obtained for the nanotubes anodized without IL.