The influence of surfactant loading level in a montmorillonite on the thermal, mechanical and rheological properties of EVA nanocomposites

• Published in: Applied clay science 2013-10, Vol.83-84, p.153-161
• Main Authors: Beltrán, M.I., Benavente, V., Marchante, V., Marcilla, A.
• Format: Article
• Language: English
• Subjects: Clay polymer nanocomposites; Earth sciences; Earth, ocean, space; Ethyl hexadecyl dimethyl ammonium bromide; EVA; Exact sciences and technology; Mineralogy; Modified montmorillonite; Silicates
• ISSN: 0169-1317; 1872-9053
• DOI: 10.1016/j.clay.2013.08.028

In this work, montmorillonite (Mt) has been organically modified with ethyl hexadecyl dimethyl ammonium (EHDDMA) in 20, 50, 80 and 100% of the nominal exchange capacity (CEC) of the Mt. A full characterization of the organo-montmorillonite (OMt) obtained has been made, including thermal analysis, X-Ray Diffraction, elemental analysis CHN and nitrogen adsorption. According to the results, 12% in mass of the surfactant added is strongly retained by the Mt. When the mass percentage of EHDDMA exchanged in the OMt is increased up to this level, the interactions OMt–EHDDMA are steeply reduced depending on the EHDDMA content. Clay polymer nanocomposites (CPN) were prepared by melt mixing of EVA and different loads of OMt. The CPN were compress molded to obtain 1mm thick sheets, which have been characterized according to their mechanical, thermal and rheological behaviors. The major changes in the structure of the OMt are obtained for low contents of EHDDMA. Nevertheless, the CPN containing OMt exchanged at 20 and 50% of the CEC show relatively low effect of the EHDDMA while the mechanical response and rheological behavior of CPN with OMt modified at 80 and 100% of the CEC are much more pronounced.