Comfort fitting shape memory elastomer with constructed strong interface based on amphiphilic hybrid Janus particles

• Published in: Composites. Part B, Engineering Engineering, 2022-05, Vol.236, p.109828, Article 109828
• Main Authors: Hu, Jing, Lv, Gege, Ning, Nanying, Yu, Bing, Tian, Ming, Zhang, Liqun
• Format: Article
• Language: English
• Subjects: Hybrid janus particles; Interface; Shape memory silicone elastomer; Soft touching feeling
• ISSN: 1359-8368; 1879-1069
• DOI: 10.1016/j.compositesb.2022.109828

Comfort fitting shape memory elastomer exhibits various potential application in flexible wearable and biomedical devices, which can be developed by mixing the comfort fitting elastomer with the materials of reversible transition. However, it's very difficult to obtain the soft touching feeling, high elongation, and excellent shape memory property at the same time, and the key point mainly depends on improving interface stability and adjusting the morphology by the compatibilizer. In the work, silicone elastomer with excellent shape memory property was obtained by developing an amphiphilic PCL-JP-PDMS hybrid Janus particles compatibilizer for methyl vinyl silicone elastomer/polycaprolactone (MVQ/PCL) blend. Only through increasing the PDMS grafting ratio on the PCL-JP-PDMS particles compatibilizer, the morphology of PCL dispersed phase changed from short fibrous to similar spherical, which ensured the comfort feeling (E = 5.9 MPa), high fixity (Rf = 95%) and recovery ratio (Rr = 99%) of shape memory MVQ/PCL blends. Furthermore, the shape memory silicone elastomer exhibited impressive elasticity in temporary shape at T = 25 °C, which is quite suitable for designing wearable device. Silicone elastomer with excellent shape memory property was obtained by developing an amphiphilic PCL-JP-PDMS hybrid Janus particles compatibilizer for MVQ/PCL blend, the amphiphilic PCL-JP-PDMS Janus particles were anchored at the interface of MVQ/PCL blends by the similar molecular chain entanglement and the stable conformation of asymmetric SiO2@PDVB particles. Much more importantly, the PCL-JP-PDMS particles with different PDMS grafting ratio were prepared as the compatibilizer, which made the interface adhesion and the property of MVQ/PCL blend be regulated by PDMS grafting ratio, which ensured the comfort feeling (E = 5.9 MPa), high fixity (Rf = 95%) and recovery ratio (Rr = 99%) of shape memory MVQ/PCL blends under the content of 3 wt % particles and 30 wt % PCL. Furthermore, the shape memory silicone elastomer exhibited impressive elasticity in temporary shape at T = 25 °C, which is quite suitable for designing wearable device. [Display omitted]