Entrained flow gasification-based biomass-to-X processes: An energetic and technical evaluation

• Published in: Energy conversion and management 2022-12, Vol.274, p.116424, Article 116424
• Main Authors: Hanel, Andreas, Dieterich, Vincent, Bastek, Sebastian, Spliethoff, Hartmut, Fendt, Sebastian
• Format: Article
• Language: English
• Subjects: Biomass-to-X; Entrained flow gasification; Process simulation; Sustainable energy carriers
• ISSN: 0196-8904
• DOI: 10.1016/j.enconman.2022.116424

•Detailed process simulation of six BtX process routes for direct comparability.•Evaluation based on ten energetic and material-based KPIs.•Methanol shows most promising combination of energetic and material yields.•FT-fuels are especially interesting for integration into industrial parks.•Hydrogen from biomass only for negative emissions or further CO2 utilization. A large number of process routes is available for the production of sustainable energy carriers from biogenic residues. Benchmarking these routes usually suffers from a lack of comparable performance data. The present work addresses this through a comprehensive model-based comparison of various biomass-to-X routes. Herein, seven routes (methanol, synthetic natural gas, dimethyl ether, Fischer-Tropsch syncrude, ammonia, and hydrogen with and without carbon capture) are modelled in detailed Aspen Plus® simulations. The evaluation itself is based on various key performance indicators, which capture both energetic (i.e. energy yield and usable heat per feedstock) and material-based (i.e. carbon and hydrogen conversion efficiency, and CO2 emissions) properties of the routes. The results show, that no simple correlations can be drawn between energetic and material-based indicators. In summary across all considered properties, the methanol route exhibits the best combined results, in particular with the highest carbon efficiency of 40 %. Fischer-Tropsch is more suitable for integration into existing industrial parks due to the lowest energy yield of 40 % with a lot of by-product formation and the highest amount of useable heat per feedstock of 211.3kWMW-1. Whereas dimethyl ether and synthetic natural gas have potential for integration into heat grids, mainly due to their good conversion and simultaneous large heat dissipation. Ammonia and hydrogen should only be considered in combination with carbon capture. Therefore, the key performance indicators determined herein must be considered together with project- and location-specific requirements and the market outlook for the product.