Core-shell structured tungsten–tungsten carbide as a Pt catalyst support and its activity for methanol electrooxidation

• Published in: International journal of hydrogen energy 2012-07, Vol.37 (14), p.10671-10679
• Main Authors: OBRADOVIC, M. D, BABIC, B. M, RADMILOVIC, V. R, KRSTAJIC, N. V, GOJKOVIC, S. Lj
• Format: Article
• Language: English
• Subjects: Alternative fuels. Production and utilization; Applied sciences; CO oxidation; Electrocatalysis; Energy; Exact sciences and technology; Fuel cell; Fuels; Hydrogen; Methanol oxidation; Platinum; Tungsten carbide
• ISSN: 0360-3199; 1879-3487
• DOI: 10.1016/j.ijhydene.2012.04.114

Tungsten carbide was synthesized by calcination of carbon cryogel containing tungsten in a form of metatungstate. Characterization by X-ray diffraction and transmission electron microscopy indicated core-shell structure of the particles with tungsten core and tungsten carbide shell, attached to graphitized carbon. Pt nanoparticles were deposited on this material and most of them were nucleated on tungsten carbide. Cyclic voltammetry of W-C support and Pt/W-C catalyst indicated hydrogen intercalation in surface hydrous tungsten oxide. Oxidation of COads on Pt/W-C commences earlier than on Pt/C for about 100 mV. The onset potentials of MOR on Pt/W-C and Pt/C are the same, but at more positive potentials Pt/W-C catalyst is more active. It was proposed that promotion of MOR is based on bifunctional mechanism that facilitates COads removal. Stability test was performed by potential cycling of Pt/W-C and Pt/C in the supporting electrolyte and in the presence of methanol. Pt surface area loss observed in the supporting electrolyte of both catalysts after 250 cycles was about 20%. Decrease in the activity for methanol oxidation was 30% for Pt/W-C, but even 48% for Pt/C. The difference was explained by the presence of hydrous tungsten oxide on Pt in Pt/W-C catalyst, which reduces accumulation of poisoning COads. ► Tungsten–tungsten carbide nanoparticles of core-shell structure were synthesized. ► The material was used as Pt nanoparticle catalyst support. ► The Pt/W-C catalyst is active for methanol and CO electrooxidation. ► The stability of Pt/W-C is better than Pt/C due to facilitated CO removal.