The effect of Fe2O3 catalyst on direct carbon fuel cell performance

• Published in: International journal of hydrogen energy 2015-10, Vol.40 (38), p.13090-13098
• Main Authors: Skrzypkiewicz, Marek, Lubarska-Radziejewska, Iwona, Jewulski, Janusz
• Format: Article
• Language: English
• Subjects: Boudouard reaction; Catalyst; DC-SOFC; Direct carbon fuel cell; Solid oxide fuel cell
• ISSN: 0360-3199; 1879-3487
• DOI: 10.1016/j.ijhydene.2015.07.132

In a direct carbon solid oxide fuel cell (DC-SOFC), solid carbonaceous fuel is supplied directly to SOFC anode. This approach offers advantages of high efficiency, system simplicity and possibility of direct conversion for a wide range of solid, carbonaceous fuels. Additional improvements in the cell performance can be achieved with the application of catalysts. Two alternative approaches have been considered to apply catalysts in a DC-SOFC configuration. In the first approach, activated carbon has been impregnated with inexpensive Fe2O3 catalyst before supplying to the anode compartment as a fuel. In the alternative approach, SOFC anode has been impregnated with Fe2O3 catalyst while the non-catalyzed activated carbon was supplied to the anode as a fuel. In both cases, the current density for a fuel cell operating at 0.7 V, more than doubled in comparison to previously reported results in a similar test setup. This result points to the reverse Boudouard reaction (C + CO2 → 2CO) as a limiting process for the fuel cell performance. Utilization of the in-situ generated CO improved for catalyst-impregnated anode, enabling higher conversion efficiency. Moreover, the impregnation of anode with Fe2O3 consumes 17-times less catalyst than impregnation of carbon, with similar cell performance. The obtained results were compared to other DC-SOFC performance improvement approaches reported in the literature. •Application of Fe2O3 catalyst yields improved DC-SOFC performance of 130–150 mW/cm2.•Two approaches tested: Fe2O3 impregnated anode and Fe2O3 impregnated fuel.•Impregnation of anode with Fe2O3 consumes 17-times less catalyst than impregnation of carbon.•The Fe2O3 impregnated anode performance is close to that of anode operated on impregnated fuel.