Porous structures impact on particle dynamics of non-Brownian and noncolloidal suspensions

• Published in: International journal of multiphase flow 2024-08, Vol.178, p.104886, Article 104886
• Main Authors: Haffner, Eileen A., Wilkie, Theresa, Higham, Jonathan E., Mirbod, Parisa
• Format: Article
• Language: English
• Subjects: Low Reynolds number flows; Optical flow tracking velocimetry; Particle focusing; Particle Image velocimetry; Porous structures; Very dilute suspensions
• ISSN: 0301-9322
• DOI: 10.1016/j.ijmultiphaseflow.2024.104886

•Employed PIV and OFTV to study flow and particle dynamics of suspensions flows over porous structures.•The maximum velocity location in the free flow region above the porous media models is impacted by both permeability and porous thickness.•The interface properties all affected by changes in the permeability and the porous media thickness.•Through OFTV experiments, detected two concentration peaks caused by porous media: one above and one within the structure. This study aims to provide valuable insights into the impact of porous structures on particle dynamics in non-Brownian, non-colloidal suspension flows at very low Reynolds numbers. Two experimental approaches, Particle Image Velocimetry (PIV) with refractive index matching and Optical Flow Tracking Velocimetry (OFTV) were employed to analyze very dilute suspensions over various porous media models. The study considered three different porous structures with permeabilities ranging from 0.7 to 0.9 and three different thicknesses ranging from 0.2 cm to 0.5 cm, while the suspension bulk volume fraction was maintained at 3 %. In the PIV analysis, we observed that decreasing the porous permeability resulted in the maximum velocity location within the free flow region moving closer towards the interface between the flow and the porous media. We further quantified the effect of the porous structure on the suspension by characterizing interface properties, such as dimensionless slip velocity, shear rate, and slip length. These interface properties were found to be influenced by both the thickness and permeability of the porous media. Next, we analyzed particle migration due to the presence of porous structures using OFTV for very dilute suspensions of 1 %, 2 %, and 3 %, considering a porous medium with known physical properties and thickness. The study revealed two local concentration maxima: one within the free flow region on top of the rod arrays used to create the porous structure and a second along the rods' centerline inside the porous media model. [Display omitted]