Effects of geometric parameters on flow and atomization characteristics of swirl nozzles for artificial snowmaking

•The flow and atomization process of swirl nozzle is simulated by VOF to DPM approach.•The liquid film thickness is used as the conversion criteria from VOF to DPM.•The optimal parameter of nozzle structure is presented for artificial snowmaking. With the worldwide popularity of skiing, artificial s...

Full description

Saved in:
Bibliographic Details
Published in:International journal of refrigeration 2023-10, Vol.154, p.56-65
Main Authors: Dong, Peiwen, Chen, Qi, Liu, Guoqiang, Zhang, Bowen, Yan, Gang, Wang, Ruixiang
Format: Article
Language:English
Subjects:
Artificial snowmaking
Atomization characteristic
Caractéristique d’atomisation
Fabrication de neige artificielle
Geometric parameter
Paramètres géométriques
Swirl nozzle
Tuyère à jet helicoidal
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:•The flow and atomization process of swirl nozzle is simulated by VOF to DPM approach.•The liquid film thickness is used as the conversion criteria from VOF to DPM.•The optimal parameter of nozzle structure is presented for artificial snowmaking. With the worldwide popularity of skiing, artificial snow technology has been gradually developed. Atomization is the key process for snowmaking, and swirl nozzles are applied as the core atomization components in snowmakers. In this research, the effects of nozzle geometric parameters on the flow and atomization characteristics are explored to improve snowmaking performance. The flow and atomization process in swirl nozzle is simulated by VOF-DPM approach after experimental validation. The results show that appropriate increase of orifice diameter and swirl slot area can effectively reduce the atomization droplet size and increase the spray flow rate. As the diameter ratio of swirl chamber to orifice decreases from 6.67 to 2.5, Sauter Mean Diameter (SMD) decreases by 54.9%, and mass flow rate increases by 168.2%. When orifice diameter is 4.0 mm, as the atomizer constant increases from 0.1688 to 0.3797, SMD decreases by 65.8% and mass flow rate increases by 114.3%. Furthermore, the reduction in SMD and the increase in spray flow rate are attributed to high discharge velocity. The swirl nozzles have the best atomization droplet size and maximum flow rate, as the inlet pressure is 0.6 -1.4 MPa, orifice diameter is 4.0 mm and swirl slot width is 2.25 mm.
ISSN:0140-7007
1879-2081
DOI:10.1016/j.ijrefrig.2023.07.015