Loading…

Catalytic pyrolysis of waste polyethylene into benzene, toluene, ethylbenzene and xylene (BTEX)-enriched oil with dielectric barrier discharge reactor

The increasing demand for plastics has resulted in significant plastic waste accumulation and environmental pollution. Catalytic pyrolysis is an attractive treatment method to mitigate the plastic waste management problems and recover high-value oil products. In our study, waste polyethylene (PE) wa...

Full description

Saved in:
Bibliographic Details
Published in:Journal of environmental management 2022-11, Vol.322, p.116096, Article 116096
Main Authors: Song, Jiaxing, Wang, Jun, Pan, Yuhan, Du, Xudong, Sima, Jingyuan, Zhu, Chenxi, Lou, Fangfang, Huang, Qunxing
Format: Article
Language:English
Subjects:
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:The increasing demand for plastics has resulted in significant plastic waste accumulation and environmental pollution. Catalytic pyrolysis is an attractive treatment method to mitigate the plastic waste management problems and recover high-value oil products. In our study, waste polyethylene (PE) was pyrolyzed to produce benzene, toluene, ethylbenzene and xylene (BTEX)-enriched oil a using dielectric barrier discharge plasma catalytic pyrolysis reactor. Ga-modified Hydro-Zeolite Socony Mobile-Five (HZSM-5) was used as a pyrolysis catalyst. The effects of the PE to Ga/HZSM-5 ratio and discharge power on BTEX enhancement and carbon deposition are discussed. The greatest BTEX selectivity (77.04%) and relatively low coke yield (1.37%) were achieved when the PE/(Ga/HZSM-5) ratio was 2:1 with a non-thermal plasma (NTP) discharge power of 20 W. The regeneration effects of conventional thermal oxidation and NTP on the zeolite catalyst were compared. NTP regeneration at a low temperature (150 °C) achieved the same coke removal rate as that of thermal regeneration at high temperatures (500 °C). Ga/HZSM-5 subjected to NTP regeneration showed higher activity for BTEX formation (BTEX selectivity was 42.10%) as compared to that shown by Ga/HZSM-5 subjected to thermal regeneration (BTEX selectivity was 40.59%). The NTP synergistic catalytic pyrolysis of plastics over Ga/HZSM-5 was found to be a promising strategy for mitigating the plastic waste management problems and upgrading the quality of oil products. [Display omitted] •Non-thermal plasma was applied for producing BTEX enriched oil.•The acid and metal active sites were promoted by Ga loaded HZSM-5 zeolite.•A highest BTEX selectivity of 77.21% was obtained.•Waste plastics have potential in valuable fuel production.•Non-thermal plasma was developed for catalyst regeneration.
ISSN:0301-4797
1095-8630
DOI:10.1016/j.jenvman.2022.116096