Corrosion behavior of the high strength low alloy steel joined by vertical electro-gas welding and submerged arc welding methods

• Published in: Journal of manufacturing processes 2017-01, Vol.25, p.418-425
• Main Authors: Liu, Weiming, Pan, Hongbo, Li, Liaosha, Lv, Huihong, Wu, Zhaojin, Cao, Fabin, Zhu, Jianhua
• Format: Article
• Language: English
• Subjects: Corrosion behavior; Electrochemical impedance spectra; Heat effect zone; Scanning vibrating electrode technique; Submerged arc welding; Vertical electro-gas welding
• ISSN: 1526-6125; 2212-4616
• DOI: 10.1016/j.jmapro.2016.12.011

•The VEGW shows light local attack.•The SAW shows heavy general corrosion.•Welded energy affects corrosion style.•Welded pass affects corrosion degree. The high strength low alloy (HSLA) steel used as a large crude oil storage tank (LCOST) was often welded by vertical electro-gas welding (VEGW) and submerged arc welding (SAW). The VEGW specimen was produced by single-pass weld with high heat input (about 100KJ/cm), and the SAW specimen was manufactured by mutil-pass weld with low heat input (about 30KJ/cm). The corrosion behaviors of both samples were studied by electrochemical techniques and surface methods. The research results achieved in this investigation disclosed that the welding process played an important role in obtaining satisfactory corrosion property. In comparison with the SAW joint, the VEGW joint showed uniform microstructure and coarse micro-phase. The scanning vibrating electrode technique (SVET) results demonstrated that the corrosion of the VEGW joint majorly took in the heat effect zone (HAZ) and the attack for the SAW joint mainly occurred in the fusion zone (FZ). In addition, the scanning electron microscopy (SEM) results exhibited that the VEGW joint exhibited a light local attack and the SAW joint demonstrated a heavy uniform corrosion. The electrochemical results showed that the VEGW joint showed lower corrosion rate than the SAW joint. In summary, it can be discovered that the corrosion rates of welded specimens were associated with the welding-pass and the corrosion forms of welded specimens were related to the heat input energy.