Effect of composition and heat treatment on the phase evolution and mechanical properties of tough miserite-based glass ceramics

• Published in: Journal of non-crystalline solids 2013-12, Vol.382, p.112-120
• Main Authors: Hamedani, M.T., Marghussian, V.K., Sarpoolaky, H.
• Format: Article
• Language: English
• Subjects: Bioactive materials; Condensed matter: structure, mechanical and thermal properties; Cross-disciplinary physics: materials science; rheology; Exact sciences and technology; Glass crystallization; Glasses (including metallic glasses); Growth from solid phases (including multiphase diffusion and recrystallization); Materials science; Mechanical and acoustical properties; Mechanical and acoustical properties of condensed matter; Methods of crystal growth; physics of crystal growth; Miserite; Nucleation and growth; Physical properties of thin films, nonelectronic; Physics; Specific materials; Surfaces and interfaces; thin films and whiskers (structure and nonelectronic properties); Tough glass ceramics
• ISSN: 0022-3093; 1873-4812
• DOI: 10.1016/j.jnoncrysol.2013.10.015

Glass specimens with the Stoichiometric formula of miserite after the optimization of composition to obtain the maximum amount of miserite phase were melted and cast in the bulk form and converted into miserite glass ceramics. The optimum nucleation and crystallization conditions, as determined by differential thermal analysis (DTA), were 1h/610°C and 3h/806°C+3–5h/1015°C, respectively. The crystalline products and resulting microstructures were studied by X-ray diffraction (XRD), and scanning electron microscopy (SEM). It was shown that xonotlite crystals nucleated from the phase separated F–Ca rich glass droplets, rapidly grown as spherulites and gradually disappeared and replaced by miserite crystals at higher temperatures. The most promising specimens comprising interwoven, rod-shaped miserite crystals, showed the bend strength and fracture toughness values of 315±14MPa and 3.70±0.15MPa·m1/2, respectively. These specimens also exhibited the favorable signs of bioactivity. •This is a scarcely explored subject.•Novel composition/heat treatment was introduced for miserite glass ceramics.•Valuable information on the effect of synthesis parameters upon mechanical properties•Strength and toughness are among the highest values reported so far.•Great promise for applications as bioactive materials in orthopedics or dentistry