Evaluation of corn husk fibers reinforced recycled low density polyethylene composites

• Published in: Materials chemistry and physics 2015-02, Vol.152, p.26-33
• Main Authors: Youssef, Ahmed M., El-Gendy, Ahmed, Kamel, Samir
• Format: Article
• Language: English
• Subjects: Differential scanning calorimetry (DSC); Fourier transform infrared spectroscopy (FTIR) mechanical properties; Hot working; Mechanical testing; Polymers and composite materials; Scanning electron microscopy (SEM)
• ISSN: 0254-0584; 1879-3312
• DOI: 10.1016/j.matchemphys.2014.12.004

Responding to the community demand for disposal of environmental problematic agricultural and polymer waste, composite sheets using recycled low-density polyethylene (R-LDPE) and corn husk fibers were prepared by melt compounding and compression molding. These composites were prepared in different concentrations (5, 10, 15, and 20%) of powder corn husk with 125 μ particle size based on R-LDPE matrix. Beside the importance of property improvement, an additional incentive was responding to the social demand for the disposal of environmental problematic agricultural waste. The influence of loading rate on R-LDPE crystallization behavior, mechanical, and swilling properties were investigated. Increasing in fiber loading led to increased moduli and tensile strength while hardness was decreased. X-ray diffraction (XRD) examinations indicated that introducing fiber to R-LDPE matrix did not change characteristic peak position. The thermal stability of the prepared composites was evaluated using differential scanning calorimetry (DSC) which displayed that the R-LDPE had significantly larger peak heat flow during cooling run than the blank R-LDPE, indicating higher crystallization rates for R-LDPE. The prepared composites materials can be used in packaging applications. [Display omitted] •New composite based on recycled LDPE and corn husk fibers has been prepared.•The prepared composite has a benefit of minimizing solid waste problem.•The prepared composites were characterized using XRD, FTIR and DSC.•Crystallization behaviors, mechanical and swilling properties of the prepared composites were investigated.