Oxide dispersion-strengthened alloys generated by laser metal deposition of laser-generated nanoparticle-metal powder composites

• Published in: Materials & design 2018-09, Vol.154, p.360-369
• Main Authors: Doñate-Buendía, Carlos, Frömel, Felix, Wilms, Markus B., Streubel, René, Tenkamp, Jochen, Hupfeld, Tim, Nachev, Milen, Gökce, Emine, Weisheit, Andreas, Barcikowski, Stephan, Walther, Frank, Schleifenbaum, Johannes Henrich, Gökce, Bilal
• Format: Article
• Language: English
• Subjects: Laser additive manufacturing; Laser metal deposition; Laser synthesis of colloids; Nanocomposite powders; Oxide dispersion strengthened steel
• ISSN: 0264-1275
• DOI: 10.1016/j.matdes.2018.05.044

A new method is proposed for producing nanoparticle-metal composite powders for laser additive manufacturing of oxide-dispersion strengthened (ODS) alloys. Different composite powders containing laser-generated Y2O3 and yttrium iron garnet (YIG) nanoparticles were produced and consolidated by Laser Metal Deposition (LMD). The structural properties of the manufactured ODS alloys were analyzed, and their hardness, remnant porosity, and temperature-dependent compression behavior were characterized to study the effect of the composition and size of the nanoparticles on the structural and mechanical properties. While the structural analyses did not show significant differences between the processed samples within the limits of the characterization methods that were used, the temperature-dependent compression behavior showed an increase of up to 22 ± 11% in the high-temperature strength of the specimens that contained only 0.08 wt% of laser-generated nanoparticles. This increase is attributed to the dispersed and deagglomerated nature of the nanoparticles that were used during the powder-preparation step. [Display omitted] •A new route towards oxide dispersion-strengthened steel powder production with laser fragmented nanoparticles is introduced.•Hardness, porosity and compression strength of additively manufactured steel samples are determined.•The compression strength at 600 ºC for specimens reinforced with 0.08 wt% of Y2O3 nanoparticles is increased by 22±11 %.