Loading…
Low-temperature proton-exchange membrane fuel cell-grade hydrogen production by membrane reformer equipped with Pd-composite membrane and methanation catalyst on permeation stream
To produce hydrogen with a low CO concentration, steam methane reforming (SMR) was conducted in a Pd membrane reactor containing a methanation catalyst on the permeation side. Pd membranes were prepared by electroless plating (ELP) on porous stainless-steel and Inconel supports to achieve methanatio...
Saved in:
Published in: | Journal of membrane science 2021-09, Vol.634, p.119373, Article 119373 |
---|---|
Main Authors: | , , , , |
Format: | Article |
Language: | English |
Subjects: | |
Citations: | Items that this one cites Items that cite this one |
Online Access: | Get full text |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Summary: | To produce hydrogen with a low CO concentration, steam methane reforming (SMR) was conducted in a Pd membrane reactor containing a methanation catalyst on the permeation side. Pd membranes were prepared by electroless plating (ELP) on porous stainless-steel and Inconel supports to achieve methanation. Compared with stainless-steel, Inconel support reduced the CO concentration by methanation. However, the membranes prepared by one-step ELP exhibited low selectivity and high CO concentrations, which was not suitable for use in low-temperature proton-exchange membrane fuel cells (LT-PEMFCs). To increase the hydrogen selectivity, a two-step vacuum-assisted ELP (VA–ELP) method was established. Hydrogen selectivity was increased by ~5 times (from 70 to 335) with this method, and hydrogen could be produced with a CO concentration of 200 ppm. However, for use in LT-PEMFCs, the CO concentration in the fuel stream is required to be below 10 ppm to prevent anode poisoning. Therefore, to further reduce the CO concentration, Ni/Al2O3, a methanation catalyst, was introduced on the permeation side of the Pd membrane reactor. SMR tests were conducted at 723 K, membrane pressure difference of 507 kPa, and gas hourly space velocity of 1200 h−1. The permeate stream produced under these conditions contained 4 ppm of CO with 97.7% H2, which is suitable for use in LT-PEMFCs.
[Display omitted]
•Inconel support was useful to reduce CO by its methanation activity.•Vacuum assisted electroless plating greatly enhanced the Pd membrane selectivity.•Methanation catalyst in the permeation stream reduced CO to be acceptable for LT-PEMFC. |
---|---|
ISSN: | 0376-7388 1873-3123 |
DOI: | 10.1016/j.memsci.2021.119373 |