Compressive properties of a closed-cell aluminum foam as a function of strain rate and temperature

• Published in: Materials science & engineering. A, Structural materials : properties, microstructure and processing Structural materials : properties, microstructure and processing, 2009-11, Vol.525 (1), p.1-6
• Main Authors: Cady, C.M., Gray, G.T., Liu, C., Lovato, M.L., Mukai, T.
• Format: Article
• Language: English
• Subjects: Aluminum foam; Applied sciences; Closed-cell foam; Elasticity. Plasticity; Exact sciences and technology; High-strain rate; Mechanical properties and methods of testing. Rheology. Fracture mechanics. Tribology; Metals. Metallurgy
• ISSN: 0921-5093; 1873-4936
• DOI: 10.1016/j.msea.2009.07.007

The compressive constitutive behavior of a closed-cell aluminum foam (ALPORAS) manufactured by Shinko Wire Co. in Japan was evaluated under static and dynamic loading conditions as a function of temperature. High-strain-rate tests (1000–2000 s −1) were conducted using a split-Hopkinson pressure bar (SHPB). Quasi-static and intermediate-strain-rate tests were conducted on a hydraulic load frame. A small but discernable change in the flow stress behavior as a function of strain rate was measured. The deformation behavior of the Al-foam was however found to be strongly temperature dependent under both quasi-static and dynamic loading. Localized deformation and stress state instability during testing of metal foams is discussed in detail since the mechanical behavior over the entire range of strain rates indicates non-uniform deformation. Additionally, investigation of the effect of residual stresses created during manufacturing on the mechanical behavior was investigated.