Effect of strain rate and temperature on the plastic deformation behaviour of a bulk metallic glass composite

• Published in: Materials science & engineering. A, Structural materials : properties, microstructure and processing Structural materials : properties, microstructure and processing, 2012-02, Vol.534, p.476-484
• Main Authors: Singh, P.S., Narayan, R.L., Sen, Indrani, Hofmann, D.C., Ramamurty, U.
• Format: Article
• Language: English
• Subjects: Applied sciences; Bulk amorphous materials; Composites; Condensed matter: structure, mechanical and thermal properties; Cross-disciplinary physics: materials science; rheology; Deformation, plasticity, and creep; Elasticity. Plasticity; Equations of state, phase equilibria, and phase transitions; Exact sciences and technology; Glass transitions; Glasses (including metallic glasses); Materials science; Mechanical properties and methods of testing. Rheology. Fracture mechanics. Tribology; Metals. Metallurgy; Physics; Plastic deformation; Shear bands; Specific materials; Specific phase transitions; Strain rate; Treatment of materials and its effects on microstructure and properties
• ISSN: 0921-5093; 1873-4936
• DOI: 10.1016/j.msea.2011.11.096

► A BMG composite is compressed at different strain rates and temperatures. ► Initially, dendrites deform and the participation of the matrix increases progressively. ► At temperatures above 600K deformation is fully controlled by the matrix. ► Higher strain rates allow more participation of dendrites in the deformation process. ► Transition from homogeneous to heterogeneous flow occurs at higher strain rates. The composites consisting of amorphous matrix reinforced with crystalline dendrites offer extraordinary combinations of strength, stiffness, and toughness and can be processed in bulk. Hence, they have been receiving intense research interest, with a primary focus to study their mechanical properties. In this paper, the temperature and strain rate effects on the uniaxial compression response of a tailored bulk metallic glass (BMG) composite has been investigated. Experimental results show that at temperatures ranging between ambient to 500K and at all strain rates; the onset of plastic deformation in the composite is controlled by that in the dendrites. As the temperature is increased to the glass transition temperature of the matrix and beyond, flow in the amorphous matrix occurs readily and hence it dictates the composite's response. The role of the constituent phases in controlling the deformation mechanism of the composite has been verified by assessing the strain rate sensitivity and the activation volume for deformation. The composite is rate sensitive at room temperature with values of strain rate sensitivity and activation volume being similar to that of the dendrites. At test temperatures near to the glass transition temperature, the composite however becomes rate-insensitive corresponding to that of the matrix phase. At low strain rates, serrated flow akin to that of dynamic strain ageing in crystalline alloys was observed and the serration magnitude decreases with increasing temperature. Initiation of the shear bands at the dendrite/matrix interface and propagation of them through the matrix ligaments until their arrest at another interface is the responsible mechanism for this.