Effects of Joule annealing on the magnetoimpedance characteristics of Nb-doped Co-based metallic microfibers

• Published in: Materials today communications 2022-12, Vol.33, p.104511, Article 104511
• Main Authors: Liu, Jingshun, Wang, Lu, Huang, Meifang, Wang, Feng, Zhang, Yun, Wang, Congliang, Liu, Rui, Shen, Hongxian
• Format: Article
• Language: English
• Subjects: Joule annealing; Magnetic anisotropy; Magnetoimpedance (MI) effect; MI ratio; Nb-doped Co-based fibers
• ISSN: 2352-4928; 2352-4928
• DOI: 10.1016/j.mtcomm.2022.104511

The microstructure and magnetic properties of Co-based metallic microfibers before and after Joule annealing were comprehensively investigated to enhance the magnetoimpedance (MI) effect of metallic microfibers and facilitate the development of magnetic sensor applications. In particular, high-resolution transmission electron microscopy was used to investigate the microstructural changes induced by Joule annealing and to, further elucidate the associated mechanism. The experimental results show that the microfibers have a smooth and homogeneous surface, with no apparent macro/micro defects, as well as high glass-forming ability and thermal stability. Additionally, the 90 mA-annealed microfibers exhibit good magnetic properties, and their Ms, Mr, Hc, and μm are 81.40 emu/g, 15.01 emu/g, 33.63 Oe, and 0.1471 nm, respectively. The 90 mA-annealed microfibers also exhibit excellent MI performance. Accordingly, the [ΔZ/Zmax]max and ξmax are 213.08% and 41.76 %/Oe as f = 1 MHz, respectively. Therefore, the Joule annealing treatment can significantly improve the MI properties of Co-based metallic microfibers, providing technical support for the development of sensitive materials for high-performance MI sensors. [Display omitted]