Matrix-assisted production of actinide molecular anions for AMS

• Published in: Nuclear instruments & methods in physics research. Section B, Beam interactions with materials and atoms Beam interactions with materials and atoms, 2022-01, Vol.510, p.10-19
• Main Authors: Zhao, X.-L., Francisco, B.B.A.
• Format: Article
• Language: English
• Subjects: Actinides AMS; Cs+ sputter ion source memory effects; FeF3 matrix; Ionization efficiencies; Matrix-assisted sputtering; Polyatomic fluoride anions
• ISSN: 0168-583X; 1872-9584
• DOI: 10.1016/j.nimb.2021.10.013

The multiple probable oxidation states of actinide elements can lead to their molecular anions to result in complicated yield patterns from a Cs+ sputter ion source. For actinides AMS, two methods can be practiced in order to concentrate the yields into just one or two anion species. The present common practice has been to avoid excessive oxygen reactions in the sputter targets, so that the mono-oxide anions can be produced with good or applicable ionization efficiencies. However, this method requires the typical 860-type Cs+ sputter ion sources to be operated with relatively high Cs+ fluxes, a condition that not all such sources in use can be operated with lasting stability. On the contrary, with low Cs+ fluxes, good or applicable ionization efficiencies can also be achieved for producing element-specific polyatomic oxide, oxyfluoride, or fluoride anions of actinides, if the sputter targets are aided with dominantly oxidizing or fluorinating matrices. This paper describes a systematic study of such phenomena using ZnO and FeF3 to form the respective oxidizing and fluorinating matrices. It was found that using the chosen set of polyatomic fluoride anions and the FeOxHy + FeF3 sputter targets, not only all rare actinides could be measured with low backgrounds matching those using mono-oxides, but also with the available ionization efficiencies fully utilized within a shorter time. A few additional merits are also noted.