3D numerical modeling of wave–monopile–seabed interaction in the presence of a scour hole

• Published in: Ocean engineering 2024-04, Vol.298, p.117254, Article 117254
• Main Authors: Sui, Titi, Liu, Chenglin, Zhang, Jisheng, Zhang, Chi, Zheng, Jinhai
• Format: Article
• Language: English
• Subjects: Liquefaction; Monopile; Pore pressure; Scour hole; Wave–structure–seabed interaction
• ISSN: 0029-8018; 1873-5258
• DOI: 10.1016/j.oceaneng.2024.117254

Coastal engineers are deeply concerned about wave-induced seabed instability around monopile foundations. Most prior studies have primarily focused on the seabed response around monopiles on flat seabeds, often neglecting the presence of scour holes commonly found in engineering practice. This study thoroughly investigates seabed response and liquefaction around monopiles of scour holes. The examination involves analyzing 3D flow velocities, dynamic wave loads, pore pressures, soil effective stresses, and wave forces around a monopile with a scoured profile. The analysis uses a model that integrates the interactions between waves, seabed, and structures, and it is implemented within the OpenFOAM framework. The study meticulously assesses the impact of scour holes on seabed responses and liquefaction zones around monopile foundations. Numerical results reveal that: (1) The magnitude of the pore pressure within the scoured seabed is reduced relative to a flat seabed; (2) Considering the scour hole effect leads to a more uniform distribution of liquefaction depth around the monopile; (3) This effect intensifies with a higher saturation degree, while it exhibits a pattern of increase, followed by a decrease with an increase in permeability. •An integrated model for wave–monopile–scour seabed is developed on OpenFOAM.•Results of wave forces, pile responses, pore pressure, and liquefaction are analyzed.•The effects of the scour hole on the soil response and liquefaction are investigated.