Mechanisms and occurrence of detonations in vapor cloud explosions

• Published in: Progress in energy and combustion science 2020-03, Vol.77, p.100804, Article 100804
• Main Authors: Oran, Elaine S., Chamberlain, Geoffrey, Pekalski, Andrzej
• Format: Article
• Language: English
• ISSN: 0360-1285; 1873-216X
• DOI: 10.1016/j.pecs.2019.100804

Not all accidental releases of flammable gases and vapors create explosions. Most releases do not find an ignition source, and of those that do ignite, most of them result in deflagrations that generate low or moderate overpressures. Under some circumstances, however, it is possible for deflagration-to-detonation transition (DDT) to occur, and this can be followed by a propagating detonation that quickly consumes the remaining detonable cloud. In a detonable cloud, a detonation creates the worst accident that can happen. Because detonation overpressures are much higher than those in a deflagration and continue through the entire detonable cloud, the damage from a DDT event is more severe. This paper first provides a brief summary of our knowledge to date of the fundamental mechanisms of flame acceleration and DDT. This information is then contrasted to and combined with evidence of detonations (detonation markers) obtained from large-scale tests and actual large vapor cloud explosions (VCEs), including events at Buncefield (UK), Jaipur (India), CAPECO (Puerto Rico), and Port Hudson (US). The major conclusion from this review is that detonations did occur in prior VCEs in at least part of the VCE accidents. Finally, actions are suggested that could be taken to minimize detonation hazards.