Sensitizing gaseous detonations for hydrogen/ethylene-air mixtures using ozone and H2O2 as dopants for application in rotating detonation engines

• Published in: Proceedings of the Combustion Institute 2021, Vol.38 (3), p.3825-3834
• Main Authors: Kumar, D. Santosh, Ivin, Kiran, Singh, Ajay V.
• Format: Article
• Language: English
• Subjects: Detonations; Fuel-sensitization; Induction length; Induction time; Thermicity
• ISSN: 1540-7489; 1873-2704
• DOI: 10.1016/j.proci.2020.08.061

The effect of ozone and hydrogen peroxide as dopants on hydrogen-air and ethylene-air detonations was investigated with one-dimensional ZND calculations. Also, the effects of dopants were studied numerically with argon and helium as diluents with an aim to reduce the temperature of detonation products while maintaining a detonation wave of sufficient strength such that its propagation is stable near its propagation limits. The primary goal of the present investigation is to isolate the chemical kinetic effects from fluid and gas dynamic effects by altering the ignition chemistry of an unburned mixture without significantly changing its thermodynamic and physical properties. The ZND calculations demonstrate that the addition of O3 and H2O2 in small quantities will substantially reduce the induction length (Δi) and time (τi), even with higher diluent percentages of argon and helium, making it a viable solution for reducing the operating temperatures of rotating detonation engines (RDEs). The effects of O3 and H2O2 are also studied numerically at lower equivalence ratios for H2/C2H4-air detonations with an aim to reduce the post-detonation temperatures below 2000 K for its application in practical engine cycles. Also, the efficacy of CF3I, as an ignition promoter at small quantities, is studied numerically for hydrogen-air detonations, and its performance is compared with O3 and H2O2.