Effect of Crystal Grain Size in Stainless Steel on Cutting Process in Micromilling

The crystal grain size of the work material is relatively large compared to the removal depth in micro-scale cutting. Therefore, the micromilling requires the small crystal grains in the material to machine accurate products in a stable manner. The study investigates the effect of crystal grain size...

Full description

Saved in:
Bibliographic Details
Published in:Procedia CIRP 2012, Vol.1, p.150-155
Main Authors: Komatsu, Takafumi, Yoshino, Tomoaki, Matsumura, Takashi, Torizuka, Shiro
Format: Article
Language:English
Subjects:
Burr
Micromachining
Milling
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:The crystal grain size of the work material is relatively large compared to the removal depth in micro-scale cutting. Therefore, the micromilling requires the small crystal grains in the material to machine accurate products in a stable manner. The study investigates the effect of crystal grain size on the cutting process in micromilling. The crystal grains of stainless steel in this study are downsized to an average size of 1.5 μm by repetition of material forming and phase transformation. The milling processes of ultra fine-grained steels were compared with those of normal grain steels. The milling tests were performed to measure the cutting force and the surface quality. The force component ratio of the ultra fine-grained steel is higher than that of the normal grain steel. The shearing force decreases in cutting of the ultra fine-grained steel; meanwhile, the friction and/or the indentation forces increase. Burr formation can be reduced with the crystal grain size. In cutting of the normal grain steel, thrust component in the cutting force suddenly drops near the end of the grooves and a large burr is left on the edge of the groove.
ISSN:2212-8271
2212-8271
DOI:10.1016/j.procir.2012.04.026