Loading…

Enhancing responsivity and detectivity in broadband UV–VIS photodetector by ex-situ UV–ozone annealing technique

In the present study, we fabricated an Ultraviolet–visible (UV–Vis) photodetector by radio frequency (RF) –sputtering ZnMgO thin films on an n-type Si substrate and studied the effect of UV-Ozone annealing, which has been proposed as a simple and low-cost post-growth strategy to improve its optical...

Full description

Saved in:
Bibliographic Details
Published in:Superlattices and microstructures 2020-01, Vol.137, p.106333, Article 106333
Main Authors: Alam, Md Jawaid, Murkute, Punam, Ghadi, Hemant, Sushama, Sushama, Dwivedi, Shyam Murli Manohar Dhar, Ghosh, Anupam, Ghosh, Chiranjib, Mondal, Aniruddha, Paul, Sritoma, Mondal, Shubham, Chakrabarti, Subhananda
Format: Article
Language:English
Subjects:
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:In the present study, we fabricated an Ultraviolet–visible (UV–Vis) photodetector by radio frequency (RF) –sputtering ZnMgO thin films on an n-type Si substrate and studied the effect of UV-Ozone annealing, which has been proposed as a simple and low-cost post-growth strategy to improve its optical detection capability. The crystalline quality of the ZnMgO thin films was studied through high-resolution X-ray diffraction measurements, which revealed the dominant ZnMgO peak at around 34.64° and 34.66° for the as-deposited and UV-Ozone annealed samples, respectively. The detector fabricated using the as-deposited ZnMgO thin film exhibited a photoresponsivity of 98 A/W, peak detectivity of 2.82 × 1013 Jones and noise-equivalent power of 7.6 × 10−13 W/√Hz for 370 nm incident light. Moreover, a high photoresponsivity of 24.4 A/W was obtained in the visible region up to 600 nm. After UV-Ozone annealing for 70 min, responsivity and detectivity improved remarkably to 199 A/W and 3.69 × 1013 Jones, respectively, and noise-equivalent power reduced to 5.4×10−13 W/√Hz. Furthermore, the UV-Ozone annealed photodetector exhibited good switching behavior with rise and fall times of 45.5 and 76.0 ms, respectively. [Display omitted] •UV-ozone annealing has been used as a post-growth optimization technique.•Low cost fabrication using metal masks were used saving lithography costs.•Very high photoresponsivity up to 199 A/W (>100% enhancement) was achieved.•High detectivity of 3.69 × 1013 Jones with low NEP of 0.54 pW/√Hz was achieved.•UV-Ozone annealed photodetectors exhibited fast switching response.
ISSN:0749-6036
1096-3677
DOI:10.1016/j.spmi.2019.106333