Measurement of fracture toughness in high-strength alloys via modified limit load analysis using flat-end cylindrical indenter

• Published in: Theoretical and applied fracture mechanics 2024-12, Vol.134, p.104740, Article 104740
• Main Authors: Okocha, S.I., Jar, P.Y.B., Hendry, M.T.
• Format: Article
• Language: English
• Subjects: Cylindrical flat-end indentation; Fracture toughness; High strength alloys; J-integral; Stress triaxiality
• ISSN: 0167-8442
• DOI: 10.1016/j.tafmec.2024.104740

In this paper, fracture toughness (KJ) was measured for high strength rail steels and AL2024-T351 via chamfered cylindrical flat-end indentation. The indentation loading focused on applying the J-integral approach to curves of load versus indentation depth up to the crack initiation point based on a modified limit load via multiple indenter sizes. To promote single indenter size for practical use, virtual indenter sizes were proposed based on geometrical similarities, where the stress intensity factors according to J-integral approach were extrapolated to minimize the contribution of the plastic component of J-integral (JP). However, when the indentation method for KJ is applied to high strength rail steels, a consideration for the modification of the J-integral approach is suggested with the inclusion of stress triaxiality effect to accommodate the pressure sensitivity experienced in compression-based testing for some materials. The KJ values were seen to agree well with fracture toughness from conventional testing (KIC) for all materials in the study showing a relative difference below 5% except the JP rail steel, which showed only a relative difference of 16%. This is based on the condition that pressure sensitivity effect is present for the rail steels and not for AL2024-T351. The study also compares different indenter sizes, which show similar pressure and normalized depth profiles consequently offering the potential for a non-destructive means to measure mechanical properties and fracture toughness via micro-sized indenters. This opens an opportunity for further studies in material characterization capabilities across a wide range of industries in the future.