Effects of −COOH Groups on Organic Particle Surface on Hydrous Alumina Heterogeneous Coating

• Published in: Industrial & engineering chemistry research 2007-06, Vol.46 (13), p.4363-4367
• Main Authors: Wu, Hai-Xia, Wang, Ting-Jie, Duan, Jun-Ling, Jin, Yong
• Format: Article
• Language: English
• Subjects: Applied sciences; Chemical engineering; Exact sciences and technology
• ISSN: 0888-5885; 1520-5045
• DOI: 10.1021/ie070376m

The effects of the −COOH groups on polystyrene particle surface on the heterogeneous coating of hydrous alumina in an aqueous process were studied. Pure polystyrene particles and particles loaded with different densities of −COOH groups were used in the hydrous alumina coating process. The particles were synthesized by the emulsifier-free emulsion polymerization of pure styrene, and copolymerization of styrene and methacrylic acid (MAA), with potassium persulfate (K2S2O8) as initiator. The amount of the −COOH groups on the copolymerized particle surface was determined by conductometric titration. High-resolution transmission electron microscopy (HRTEM) images showed that, when the density of −COOH groups loaded on the particle surfaces was high enough, the particles could be easily heterogeneously coated with hydrous alumina; when it was too low, there was much homogeneous nucleation on the coated particles and in the bulk. In the absence of −COOH groups, i.e., pure polystyrene, the particles could hardly be coated under the same conditions. It is inferred that the precipitation and reaction occurred at the sites of −COOH groups on the particle surfaces in the coating process.