A photoemission model for low work function coated metal surfaces and its experimental validation

• Published in: Journal of applied physics 2006-06, Vol.99 (12)
• Main Authors: Jensen, Kevin L., Feldman, Donald W., Moody, Nathan A., O’Shea, Patrick G.
• Format: Article
• Language: English
• ISSN: 0021-8979; 1089-7550
• DOI: 10.1063/1.2203720

Photocathodes are a critical component many linear accelerator based light sources. The development of a custom-engineered photocathode based on low work function coatings requires an experimentally validated photoemission model that accounts the complexity of the emission process. We have developed a time-dependent model accounting for the effects of laser heating and thermal propagation on photoemission. It accounts for surface conditions (coating, field enhancement, and reflectivity), laser parameters (duration, intensity, and wavelength), and material characteristics (reflectivity, laser penetration depth, and scattering rates) to predict current distribution and quantum efficiency (QE) as a function of wavelength. The model is validated by (i) experimental measurements of the QE of cesiated surfaces, (ii) the QE and performance of commercial dispenser cathodes (B, M, and scandate), and (iii) comparison to QE values reported in the literature for bare metals and B-type dispenser cathodes, all for various wavelengths. Of particular note is that the highest QE for a commercial (M-type) dispenser cathode found here was measured to be 0.22% at 266nm, and is projected to be 3.5 times larger for a 5ps pulse delivering 0.6mJ∕cm2 under a 50MV∕m field.