Loading…
Thermal conductivity and refractive index of hafnia-alumina nanolaminates
Hafnia-alumina nanolaminates show improved smoothness and reduced crystallinity relative to pure hafnia in films formed by atomic layer deposition (ALD). However, typical nanolaminates also show reduced cross-plane thermal conductivity due to the much larger interface density relative to continuous...
Saved in:
Published in: | Journal of applied physics 2011-08, Vol.110 (4), p.043526-043526-8 |
---|---|
Main Authors: | , |
Format: | Article |
Language: | English |
Citations: | Items that this one cites Items that cite this one |
Online Access: | Get full text |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Summary: | Hafnia-alumina nanolaminates show improved smoothness and reduced crystallinity relative to pure hafnia in films formed by atomic layer deposition (ALD). However, typical nanolaminates also show reduced cross-plane thermal conductivity due to the much larger interface density relative to continuous films. We find that the interface thermal resistance in hafnia-alumina nanolaminates is very low and does not dominate the film thermal conductivity, which is 1.0 to 1.2 W/(m K) at room temperature in 100 nm thin films regardless of the interface density. Measured films had a number of interfaces ranging from 2 to 40, equivalent to interface spacing varying from about 40 to 2 nm. The degree of crystallinity of these films appears to have a much larger effect on thermal conductivity than that of interface density. Cryogenic measurements show good agreement with both the minimum thermal conductivity model for disordered solids and the diffuse mismatch model of interface resistance down to about 80 K before diverging. We find that the films are quite smooth through a 400:5 ratio of hafnia to alumina in terms of ALD cycles, and the refractive index scales as expected with increasing alumina concentration. |
---|---|
ISSN: | 0021-8979 1089-7550 |
DOI: | 10.1063/1.3626462 |