Modeling resistance of nanofibrous superhydrophobic coatings to hydrostatic pressures: The role of microstructure

• Published in: Physics of fluids (1994) 2012-02, Vol.24 (2), p.022109-022109-22
• Main Authors: Bucher, T. M., Emami, B., Tafreshi, H. Vahedi, Gad-el-Hak, M., Tepper, G. C.
• Format: Article
• Language: English
• Subjects: Condensed matter: structure, mechanical and thermal properties; Exact sciences and technology; Physics; Solid-fluid interfaces; Surfaces and interfaces; thin films and whiskers (structure and nonelectronic properties); Wetting
• ISSN: 1070-6631; 1089-7666
• DOI: 10.1063/1.3686833

In this paper, we present a numerical study devised to investigate the influence of microstructural parameters on the performance of fibrous superhydrophobic coatings manufactured via dc and ac electrospinning. In particular, our study is focused on predicting the resistance of such coatings against elevated hydrostatic pressures, which is of crucial importance for submersible applications. In our study, we generate 3D virtual geometries composed of randomly or orthogonally oriented horizontal fibers with bimodal diameter distributions resembling the microstructure of our electrospun coatings. These virtual geometries are then used as the computational domain for performing full morphology numerical simulations to establish a relationship between the coatings' critical pressure (pressure beyond which the surface may depart from the Cassie state) and their microstructures. For coatings with ordered microstructures, we have also derived analytical expressions for the critical pressure based on the balance of forces acting on the water-air interface. Predictions of our force balance analysis are compared with those of our FM simulations as well as the equations proposed by Tuteja [ Proc. Natl. Acad. Sci. U.S.A. 105 , 18200 ( 2008 )] 10.1073/pnas.0804872105 , and discussed in detail. Our numerical simulations are aimed at providing useful information with regards to the tolerance of fibrous superhydrophobic coatings against elevated pressures, and helping with the design and optimization of the coatings' microstructures. Our results show considerably higher pressure tolerance for the case of coatings with orthogonally oriented fibers as compared to those with randomly laid fibers when other microstructural parameters are held constant. Moreover, it is demonstrated that thickness of the coating has less influence on performance in the case of orthogonal microstructures. Coatings' responses to other variations favor those that yield smaller-sized inter-fiber spaces. Studies are also performed investigating the effect of subtle permutations in the layer configurations of our ac-electrospun coatings, as well as the use of a hybrid coating that utilizes advantages from both dc and ac electrospinning.