Experimental validation of an ultra-thin metasurface cloak for hiding a metallic obstacle from an antenna radiation at low frequencies

• Published in: Applied physics letters 2017-07, Vol.111 (5)
• Main Authors: Teperik, Tatiana V., Burokur, Shah Nawaz, de Lustrac, André, Sabanowski, Guy, Piau, Gérard-Pascal
• Format: Article
• Language: English
• Subjects: Antenna radiation patterns; Antennas; Applied physics; Computer simulation; Engineering Sciences; Finite element method; Ground plane; Low frequencies; Metasurfaces; Monopole antennas; Monopoles; Stealth technology; Substrates; Visibility
• ISSN: 0003-6951; 1077-3118
• DOI: 10.1063/1.4996065

We demonstrate numerically and experimentally an ultra-thin (≈ λ/240) metasurface-based invisibility cloak for low frequency antenna applications. We consider a monopole antenna mounted on a ground plane and a cylindrical metallic obstacle of diameter smaller than the wavelength located in its near-field. To restore the intrinsic radiation patterns of the antenna perturbed by this obstacle, a metasurface cloak consisting simply of a metallic patch printed on a dielectric substrate is wrapped around the obstacle. Using a finite element method based commercial electromagnetic solver, we show that the radiation patterns of the monopole antenna can be restored completely owing to electromagnetic modes of the resonant cavity formed between the patch and obstacle. The metasurface cloak is fabricated, and the concept is experimentally demonstrated at 125 MHz. Performed measurements are in good agreement with numerical simulations, verifying the efficiency of the proposed cloak.