Electrospun nanofiber composites with micro-/nano-particles for thermal insulation

• Published in: Advanced composite materials 2019-03, Vol.28 (2), p.193-202
• Main Authors: Lee, Dasom, Jung, Jaemin, Lee, Gyu Hee, Lee, Woo Il
• Format: Article
• Language: English
• Subjects: A. Nanofibers; A. Silica aerogel (SAG) composite; B. Thermal insulation; E. Electrospinning
• ISSN: 0924-3046; 1568-5519
• DOI: 10.1080/09243046.2018.1478607

Polyacrylonitrile (PAN) nanofiber and silica aerogel (SAG) laminated composites were prepared via electrospinning for thermal insulation. Conventional single nozzle and co-axial electrospinning were used to increase the fraction of aerogel particles in the composite sheets while maintaining the mechanical strength of the sheet. When the core-shell electrospinning technique with co-axial nozzle was applied, the proportion of aerogel particles increased two fold without a deterioration of the mechanical properties. The average thermal conductivity of the laminated composite sheet was reduced by approximately 12.5% as compared to the nanofiber composite prepared using the single-nozzle electrospinning technique. For additional reduction in thermal conductivity, hollow glass microspheres (HGM) was inserted between the interlayer spacing of the electrospun sheets to increase the interlayer spacing. When HGM particles were inserted, it was observed that the thermal conductivity decreased by approximately 20% compared to that of the specimen without particles.