Effect of different design aspects of pipe for earth air tunnel heat exchanger system: A state of art

• Published in: International journal of green energy 2019-06, Vol.16 (8), p.598-614
• Main Authors: Agrawal, Kamal Kumar, Misra, Rohit, Agrawal, Ghanshyam Das, Bhardwaj, Mayank, Jamuwa, Doraj Kamal
• Format: Article
• Language: English
• Subjects: horizontal pipe-layouts; multi-layered pipe-layouts; Passive cooling and heating; pipe properties; positioning of pipe; vertical pipe-layouts
• ISSN: 1543-5075; 1543-5083
• DOI: 10.1080/15435075.2019.1601096

Earth air tunnel heat exchanger (EATHE) is a promising passive technique to provide thermal comfort condition in buildings. EATHE system uses undisturbed temperature of the ground for heating/cooling of air. Despite the several advantages, this technique has not become much popular owing to its high capital cost (mainly pipe cost and trench excavation cost) and large land area requirements. The primary objective of this study is to present a comprehensive review of different EATHE pipe layouts, pipe properties and positioning of the pipe with their advantages and limitations. It is observed that the ring pipe layout is the most cost-effective pipe-layout for small size EATHE system because it saves excavation cost by using a trench of the existing foundation of the building. However, Grid pipe-layout is an ideal layout for a large size EATHE system. Multi-layer pipe layouts should be used to reduce the land area requirement significantly. Moreover, EATHE system can be installed beneath the building (under building foot-print) to eliminate extra land area requirement for the installation of EATHE system. This review article shows that the Initial capital cost and land area requirement for the EATHE system can be substantially reduced by using appropriate pipe layout. It can be concluded that if EATHE system is installed with proper design strategies, it will be a clean and cost-effective method for building heating/cooling with significant power savings.