Effect of elastic deformation on the heat transfer characteristic of refrigerator gasket based on static analysis of structural assemblies

• Published in: International journal of green energy 2024-10, Vol.21 (13), p.2923-2938
• Main Authors: Liu, Guoqiang, Dong, Peiwen, Xiong, Tong, Yan, Gang
• Format: Article
• Language: English
• Subjects: contact; deformation; Gasket; refrigerator; seal
• ISSN: 1543-5075; 1543-5083
• DOI: 10.1080/15435075.2024.2338903

Soft and hard contact deformation is most common issue of the refrigerator gasket and it has almost been ignored in previous studies. In this paper, the novelty is to propose a thermal-solid coupling simulation to study the effect of assembly states on the heat transfer of gaskets, improving the accuracy of heat transfer simulation analysis. The numerical results indicate that the calculated temperature based on physical model of assembly state is closer to measured temperature. The assembly distance affects the assembly state of the gasket by changing the contact positions and lengths of contact interfaces. As a result, the heat transfer path and condition at the gasket region also changes. As the deformation increases form −1.0 mm to 5.0 mm, the heat leakage load of gasket rises firstly and then falls, in the range of 1.61 ~ 3.33 W*m −1 . The heat leakage at the transfer paths of internal cold air, outer shell and cold bridge accounts for over 20%. Thus, it is recommended to reduce the contact interface length of internal cold air, increase the thermal resistance of auxiliary air-bag, reduce the thermal conductivity and thickness of magnetic strip and increase the contact thermal resistance of cold bridge.