Temperature-dependent photoluminescence of InSb/InAs nanostructures with InSb thickness in the above-monolayer range

• Published in: Journal of physics. D, Applied physics Applied physics, 2016-07, Vol.49 (28), p.285108
• Main Authors: Firsov, D D, Komkov, O S, Solov'ev, V A, Kop'ev, P S, Ivanov, S V
• Format: Article
• Language: English
• Subjects: infrared photoluminescence; InSb/InAs nanostructures; molecular-beam epitaxy; type-II heterostructures
• ISSN: 0022-3727; 1361-6463
• DOI: 10.1088/0022-3727/49/28/285108

Photoluminescence (PL) properties of type-II InSb/InAs periodic nanostructures containing above-monolayer (ML)-thick InSb insertions, grown by molecular beam epitaxy, are studied by using an FTIR spectrometer in wide temperature range. The samples exhibit bright PL in the 3.5-5.5 μm range, which is attributed to recombination of holes localized in InSb with electrons accumulated nearby in the InAs matrix. An increase in the InSb nominal thickness from 1 ML to 1.6 ML results in an increase of the PL peak wavelength up to 5.5 μm (300 K), and significantly improves luminescence intensity at 300 K due to a twice larger energy of hole localization. The InSb/InAs nanostructures also demonstrate an anomalous 'blue' shift of the PL peak energy as the temperature increases in the 12-80 K range, which is attributed to the thermally induced population of localized states in the InSb insertions, emerging due to composition/thickness fluctuations. Sb segregation in the cap InAs barrier smooths the potential inhomogeneities in the insertions, which reduces the broadening parameter.