Experiments during AC current transition in ISTTOK and the hypothesis of ballistic runaway electrons

• Published in: Plasma physics and controlled fusion 2022-09, Vol.64 (9), p.95013
• Main Authors: Malaquias, A, Hole, M, Henriques, R B, Nedzelskiy, I S, Plyusnin, V V
• Format: Article
• Language: English
• Subjects: alternating discharges in tokamaks; heavy ion beam diagnostic; nuclear fusion diagnostics; run away electrons in AC discharges
• ISSN: 0741-3335; 1361-6587
• DOI: 10.1088/1361-6587/ac7ee5

The operation of the Instituto Superior Técnico Tokamak (ISTTOK) in the alternating current (AC) regime is characterized by the presence of a residual plasma density during the current transition, i.e. when the plasma current crosses the zero value. Contrary to what has been reported in other AC experiments, the pressure-like profiles obtained by the heavy ion beam diagnostic (the product of plasma density with a known function of plasma temperature) do not show evidence of the co-existence of two anti-parallel currents. This is also confirmed by the fact that in these experiments the plasma current and the V loop both cross the zero value at the same instant. The Murakami–Hugill plots reveal that during the transition the plasma current decays faster than the Hugill limit and that the subsequent ramp-up phase is sustained by runaway electron (RE) currents. It is hypothesized that during plasma current decay a population of REs can enter the following semi-cycle of the discharge. A trajectory simulation model including the forces at play shows that the retardation effect of the friction and molecular forces can cause the dampening of REs (within 20 μ s) with energy below 1 keV inside the chamber (without external vertical correction magnetic fields), thus ionizing the background gas. Faster REs (above 1 keV) can also contribute to the ionization of the background gas (e.g. within 50 μ s for 3 keV energy electrons) but require a vertical magnetic field to balance the gradB and curvature drifts. This could explain why tuning the vertical field and dosing the background pressure to obtain successful AC discharges is usually challenging.