Determination of Fracture Limit Line in Principal Strain Space by Shear Tests

• Published in: IOP conference series. Materials Science and Engineering 2021-08, Vol.1178 (1), p.12060
• Main Authors: Urbánek, M., Fedorko, M., Rund, M.
• Format: Article
• Language: English
• Subjects: Axial stress; Damage assessment; Deep drawing; Forming limit diagrams; Fracture point; High strength steels; Shear tests; Tensile tests
• ISSN: 1757-8981; 1757-899X
• DOI: 10.1088/1757-899X/1178/1/012060

The main goal of this paper was to define a new limit line, which expands Forming Limit Curve (FLC) more precisely Fracture Forming Limit Curve (FFLC). The new limit line was defined by damage models transformed from triaxiality-fracture strain space to the major/minor strain space and we focused on the shear area. Because FLC and FFLC have some limitations, for example, some Advanced High Strength Steels (AHSS) fractures before thinning. Another limitation can be seen on the left side of the diagrams in the shear region, where the part can break in the process without crossing the FLC or FFLC. The different shapes of samples were used for finding a new line of the FFLC and Deep Drawing Test (DDT) was used for verification. The fracture points from measurement were used for calibration of simple uncoupled damage models. The simple model means model, which is calibrated based on one or two measurements (tensile test or tensile test + shear test). This paper was used an Advanced High Strength Steel (AHSS) DP1000 sheet with a thickness of 0.8 mm for the experiments.