Determination of Surface Recombination Velocity From Current-Voltage Characteristics in SiC p-n Diodes

• Published in: IEEE transactions on electron devices 2018-11, Vol.65 (11), p.4786-4791
• Main Authors: Asada, Satoshi, Suda, Jun, Kimoto, Tsunenobu
• Format: Article
• Language: English
• Subjects: Carrier density; Current voltage characteristics; Diodes; Hafnium; P-i-n diodes; Passivation; Passivity; Schottky diodes; SiC p-n diode; Silicon carbide; Silicon dioxide; Spontaneous emission; surface recombination velocity; TCAD simulation; Velocity
• ISSN: 0018-9383; 1557-9646
• DOI: 10.1109/TED.2018.2867545

Surface recombination velocity on mesa sidewalls of SiC p-n diodes with various surface passivation conditions was evaluated from the device-size-dependent preexponential factor of recombination current ( {J}_{\text {0rec}} ). The diodes passivated by SiO 2 with postoxidation nitridation were dipped into HF to eliminate a shunt current, which is evoked by the nitrided SiO 2 layer and disturbs the analysis of the recombination current. For accurate determination of the surface recombination velocity, an effective recombination zone width was precisely derived taking account of the distribution of carrier density in the depletion layer. The surface recombination velocity of the diodes without any passivation and with the postoxidation nitridation (NO annealing at 1250 °C for 70 min) was determined as \text {1.2}\times \text {10}^{\text {7}} and \text {6.0}\times \text {10}^{\text {5}} cm/s, respectively, which indicates that the postoxidation nitridation can reduce the surface recombination by a factor of about 20. We confirmed that TCAD simulation could reproduce the current-voltage characteristics by utilizing the extracted parameters. In addition, an evaluation method was proposed to determine the surface recombination velocity from the high-current region, where diffusion current is dominant.