The Undercutting of Hobbed Spur Gear Teeth

A general method is presented for the determination of the minimum number of teeth that can be cut in a spur gear without undercutting by a rounded-tooth tip hob. The minimum number of teeth to produce undercutting was investigated for three trochoid/tooth-profile relations: (1) trochoid tangent to...

Full description

Saved in:
Bibliographic Details
Published in:Journal of mechanical design (1990) 1983-03, Vol.105 (1), p.122-128
Main Authors: Mitchiner, R. G, Mabie, H. H, Moosavi-Rad, H
Format: Article
Language:English
Citations: Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
cited_by cdi_FETCH-LOGICAL-a317t-d332ccb74f785fa9bd72680ba47e885a7e8e4aade315874ed48fb33bcfc75e5f3
cites
container_end_page 128
container_issue 1
container_start_page 122
container_title Journal of mechanical design (1990)
container_volume 105
creator Mitchiner, R. G
Mabie, H. H
Moosavi-Rad, H
description A general method is presented for the determination of the minimum number of teeth that can be cut in a spur gear without undercutting by a rounded-tooth tip hob. The minimum number of teeth to produce undercutting was investigated for three trochoid/tooth-profile relations: (1) trochoid tangent to the involute profile at the base circle, (2) trochoid tangent to a straight portion of the tooth flank, and (3) trochoid intersecting the involute profile at the base circle. It was found that in order to avoid undercutting, the minimum number of teeth cut into a gear occurs when the trochoid is tangent to the involute at the base circle. There is no set of hob parameters such that the trochoid intersects the involute profile at the base circle nor does the case of the trochoid being tangent to a straight flank exist. A set of figures representing the variation of the amount of undercutting versus the number of teeth, radius of hob-tooth tip, hob addendum, cutting pressure angle, and the corresponding derivatives are included for a typical gear.
doi_str_mv 10.1115/1.3267330
format article
fullrecord <record><control><sourceid>asme_cross</sourceid><recordid>TN_cdi_crossref_primary_10_1115_1_3267330</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>433920</sourcerecordid><originalsourceid>FETCH-LOGICAL-a317t-d332ccb74f785fa9bd72680ba47e885a7e8e4aade315874ed48fb33bcfc75e5f3</originalsourceid><addsrcrecordid>eNotT01LAzEUDKJgrR48e8lVYWuSlzTZoxRthYIHt-eQjxfbYndLsnvw37ulvcwMwzDMEPLI2Yxzrl75DMRcA7ArMuFKmKpmjF-PmilWManFLbkrZT-a3Eg1IS_NFummjZjD0Pe79od2ia467zHS7-OQ6RJdpg1iv70nN8n9Fny48JRsPt6bxapafy0_F2_rygHXfRUBRAhey6SNSq72UYu5Yd5JjcYoNyJK5yICV0ZLjNIkD-BDClqhSjAlz-fekLtSMiZ7zLuDy3-WM3s6abm9nByzT-esKwe0-27I7TjNSoBaMPgHsBBLxA</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype></control><display><type>article</type><title>The Undercutting of Hobbed Spur Gear Teeth</title><source>ASME Transactions Journals (Archives)</source><creator>Mitchiner, R. G ; Mabie, H. H ; Moosavi-Rad, H</creator><creatorcontrib>Mitchiner, R. G ; Mabie, H. H ; Moosavi-Rad, H</creatorcontrib><description>A general method is presented for the determination of the minimum number of teeth that can be cut in a spur gear without undercutting by a rounded-tooth tip hob. The minimum number of teeth to produce undercutting was investigated for three trochoid/tooth-profile relations: (1) trochoid tangent to the involute profile at the base circle, (2) trochoid tangent to a straight portion of the tooth flank, and (3) trochoid intersecting the involute profile at the base circle. It was found that in order to avoid undercutting, the minimum number of teeth cut into a gear occurs when the trochoid is tangent to the involute at the base circle. There is no set of hob parameters such that the trochoid intersects the involute profile at the base circle nor does the case of the trochoid being tangent to a straight flank exist. A set of figures representing the variation of the amount of undercutting versus the number of teeth, radius of hob-tooth tip, hob addendum, cutting pressure angle, and the corresponding derivatives are included for a typical gear.</description><identifier>ISSN: 1050-0472</identifier><identifier>ISSN: 0738-0666</identifier><identifier>EISSN: 1528-9001</identifier><identifier>DOI: 10.1115/1.3267330</identifier><language>eng</language><publisher>ASME</publisher><ispartof>Journal of mechanical design (1990), 1983-03, Vol.105 (1), p.122-128</ispartof><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-a317t-d332ccb74f785fa9bd72680ba47e885a7e8e4aade315874ed48fb33bcfc75e5f3</citedby></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,776,780,27901,27902,38496</link.rule.ids></links><search><creatorcontrib>Mitchiner, R. G</creatorcontrib><creatorcontrib>Mabie, H. H</creatorcontrib><creatorcontrib>Moosavi-Rad, H</creatorcontrib><title>The Undercutting of Hobbed Spur Gear Teeth</title><title>Journal of mechanical design (1990)</title><addtitle>J. Mech. Des</addtitle><description>A general method is presented for the determination of the minimum number of teeth that can be cut in a spur gear without undercutting by a rounded-tooth tip hob. The minimum number of teeth to produce undercutting was investigated for three trochoid/tooth-profile relations: (1) trochoid tangent to the involute profile at the base circle, (2) trochoid tangent to a straight portion of the tooth flank, and (3) trochoid intersecting the involute profile at the base circle. It was found that in order to avoid undercutting, the minimum number of teeth cut into a gear occurs when the trochoid is tangent to the involute at the base circle. There is no set of hob parameters such that the trochoid intersects the involute profile at the base circle nor does the case of the trochoid being tangent to a straight flank exist. A set of figures representing the variation of the amount of undercutting versus the number of teeth, radius of hob-tooth tip, hob addendum, cutting pressure angle, and the corresponding derivatives are included for a typical gear.</description><issn>1050-0472</issn><issn>0738-0666</issn><issn>1528-9001</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>1983</creationdate><recordtype>article</recordtype><recordid>eNotT01LAzEUDKJgrR48e8lVYWuSlzTZoxRthYIHt-eQjxfbYndLsnvw37ulvcwMwzDMEPLI2Yxzrl75DMRcA7ArMuFKmKpmjF-PmilWManFLbkrZT-a3Eg1IS_NFummjZjD0Pe79od2ia467zHS7-OQ6RJdpg1iv70nN8n9Fny48JRsPt6bxapafy0_F2_rygHXfRUBRAhey6SNSq72UYu5Yd5JjcYoNyJK5yICV0ZLjNIkD-BDClqhSjAlz-fekLtSMiZ7zLuDy3-WM3s6abm9nByzT-esKwe0-27I7TjNSoBaMPgHsBBLxA</recordid><startdate>19830301</startdate><enddate>19830301</enddate><creator>Mitchiner, R. G</creator><creator>Mabie, H. H</creator><creator>Moosavi-Rad, H</creator><general>ASME</general><scope>AAYXX</scope><scope>CITATION</scope></search><sort><creationdate>19830301</creationdate><title>The Undercutting of Hobbed Spur Gear Teeth</title><author>Mitchiner, R. G ; Mabie, H. H ; Moosavi-Rad, H</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-a317t-d332ccb74f785fa9bd72680ba47e885a7e8e4aade315874ed48fb33bcfc75e5f3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>1983</creationdate><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Mitchiner, R. G</creatorcontrib><creatorcontrib>Mabie, H. H</creatorcontrib><creatorcontrib>Moosavi-Rad, H</creatorcontrib><collection>CrossRef</collection><jtitle>Journal of mechanical design (1990)</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Mitchiner, R. G</au><au>Mabie, H. H</au><au>Moosavi-Rad, H</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>The Undercutting of Hobbed Spur Gear Teeth</atitle><jtitle>Journal of mechanical design (1990)</jtitle><stitle>J. Mech. Des</stitle><date>1983-03-01</date><risdate>1983</risdate><volume>105</volume><issue>1</issue><spage>122</spage><epage>128</epage><pages>122-128</pages><issn>1050-0472</issn><issn>0738-0666</issn><eissn>1528-9001</eissn><abstract>A general method is presented for the determination of the minimum number of teeth that can be cut in a spur gear without undercutting by a rounded-tooth tip hob. The minimum number of teeth to produce undercutting was investigated for three trochoid/tooth-profile relations: (1) trochoid tangent to the involute profile at the base circle, (2) trochoid tangent to a straight portion of the tooth flank, and (3) trochoid intersecting the involute profile at the base circle. It was found that in order to avoid undercutting, the minimum number of teeth cut into a gear occurs when the trochoid is tangent to the involute at the base circle. There is no set of hob parameters such that the trochoid intersects the involute profile at the base circle nor does the case of the trochoid being tangent to a straight flank exist. A set of figures representing the variation of the amount of undercutting versus the number of teeth, radius of hob-tooth tip, hob addendum, cutting pressure angle, and the corresponding derivatives are included for a typical gear.</abstract><pub>ASME</pub><doi>10.1115/1.3267330</doi><tpages>7</tpages></addata></record>
fulltext fulltext
identifier ISSN: 1050-0472
ispartof Journal of mechanical design (1990), 1983-03, Vol.105 (1), p.122-128
issn 1050-0472
0738-0666
1528-9001
language eng
recordid cdi_crossref_primary_10_1115_1_3267330
source ASME Transactions Journals (Archives)
title The Undercutting of Hobbed Spur Gear Teeth
url http://sfxeu10.hosted.exlibrisgroup.com/loughborough?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-02-12T21%3A25%3A01IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-asme_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=The%20Undercutting%20of%20Hobbed%20Spur%20Gear%20Teeth&rft.jtitle=Journal%20of%20mechanical%20design%20(1990)&rft.au=Mitchiner,%20R.%20G&rft.date=1983-03-01&rft.volume=105&rft.issue=1&rft.spage=122&rft.epage=128&rft.pages=122-128&rft.issn=1050-0472&rft.eissn=1528-9001&rft_id=info:doi/10.1115/1.3267330&rft_dat=%3Casme_cross%3E433920%3C/asme_cross%3E%3Cgrp_id%3Ecdi_FETCH-LOGICAL-a317t-d332ccb74f785fa9bd72680ba47e885a7e8e4aade315874ed48fb33bcfc75e5f3%3C/grp_id%3E%3Coa%3E%3C/oa%3E%3Curl%3E%3C/url%3E&rft_id=info:oai/&rft_id=info:pmid/&rfr_iscdi=true